ZI-RPE160C - Vibratory plate Zipper - Free user manual and instructions
Find the device manual for free ZI-RPE160C Zipper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vibratory Plate |
| Brand | Zipper |
| Model | ZI-RPE160C |
| Engine Type | 4-stroke petrol engine |
| Engine Power | 5.5 hp (4.1 kW) |
| Centrifugal Force | 16 kN |
| Compaction Depth | Up to 30 cm |
| Operating Speed | 0 - 25 m/min |
| Plate Size | 580 x 640 mm |
| Dimensions (L x W x H) | 980 x 640 x 980 mm |
| Weight | 105 kg |
| Fuel Tank Capacity | 4.5 L |
| Water Tank (for dust suppression) | Optional |
| Vibration Frequency | 80 Hz |
| Maintenance Interval | Every 50 hours |
| Safety Features | Emergency stop, safety handle |
| Spare Parts Availability | Yes, via authorized dealers |
| Reparability | Modular design, user serviceable |
Frequently Asked Questions - ZI-RPE160C Zipper
What type of oil does the Zipper ZI-RPE160C use?
Use SAE 10W-30 or SAE 15W-40 engine oil, depending on ambient temperature.
How often should I change the engine oil?
Change the engine oil every 50 hours of operation or at the start of each season.
What fuel should I use for the ZI-RPE160C?
Use unleaded petrol with an octane rating of 95 RON or higher. Do not use ethanol blends above 10%.
How do I adjust the speed of the vibratory plate?
The speed is controlled by the throttle lever on the handlebar. Push forward to increase speed, pull back to decrease.
What is the maximum compaction depth?
The ZI-RPE160C can compact up to 30 cm in granular soil, but optimal results are achieved in layers of 15-20 cm.
How do I store the machine long-term?
Drain the fuel tank, run the engine until it stops, remove the spark plug, and store in a dry, protected area. Clean the plate surface.
What safety precautions should I take?
Always wear ear protection, safety goggles, and sturdy boots. Keep hands away from moving parts and never operate on slopes over 20°.
How do I replace the wear plates?
Remove the bolts securing the worn plates using a wrench, fit new plates, and tighten bolts to 40 Nm torque.
Why is the plate not vibrating?
Check the engine speed (must be above 3000 rpm), the V-belt tension, and the exciter clutch. If all are fine, consult a technician.
Where can I find spare parts?
Spare parts are available through Zipper authorized dealers or online at the manufacturer's website. Use the model number ZI-RPE160C.
User questions about ZI-RPE160C Zipper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vibratory plate in PDF format for free! Find your manual ZI-RPE160C - Zipper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZI-RPE160C by Zipper.
USER MANUAL ZI-RPE160C Zipper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zipper
Model : ZI-RPE160C
Category : Vibratory plate