IPCAM-BE01 - Surveillance Camera CHACON - Free user manual and instructions
Find the device manual for free IPCAM-BE01 CHACON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Indoor/outdoor surveillance camera |
| Brand | Chacon |
| Model | IPCAM-BE01 |
| Resolution | 1080p Full HD |
| Viewing angle | 110° |
| Night vision | Yes, up to 10 meters |
| Connectivity | Wi-Fi 2.4 GHz |
| Power supply | Power adapter 5V/1A (included) |
| Dimensions | 110 x 60 x 60 mm |
| Weight | 200 g |
| Protection rating | IP65 (outdoor) |
| Motion detection | Yes, with push notifications |
| Two-way audio | Yes, built-in microphone and speaker |
| Storage | microSD card (up to 128 GB) and cloud |
| Mobile app | Chacon Home (iOS and Android) |
| Voice assistant | Compatible with Alexa and Google Assistant |
| Care and cleaning | Clean with a soft, dry cloth. Avoid abrasive products. |
| Security | Data encryption, regular firmware updates |
| Spare parts and repairability | Power adapter available online. Repair by authorized center. |
Frequently Asked Questions - IPCAM-BE01 CHACON
How to connect the Chacon IPCAM-BE01 camera to Wi-Fi?
Download the Chacon Home app, create an account, then follow the instructions in the app to add the camera. Make sure your phone is connected to the 2.4 GHz Wi-Fi network.
Does the camera work outdoors?
Yes, the IPCAM-BE01 has an IP65 rating, making it resistant to dust and water splashes. It can be installed outdoors under a shelter.
How to record videos?
You can insert a microSD card (up to 128 GB) into the camera for local recording, or subscribe to a cloud subscription via the Chacon Home app.
Can I talk through the camera?
Yes, the camera is equipped with a built-in microphone and speaker, allowing two-way audio. You can speak and listen through the app.
How to reset the camera to factory settings?
Press and hold the reset button (located on the back of the camera) for about 10 seconds until you hear a beep. The camera will restart and be ready to be set up again.
Is the camera compatible with Alexa or Google Assistant?
Yes, the IPCAM-BE01 is compatible with Amazon Alexa and Google Assistant. Enable the 'Chacon Home' skill in your assistant's app.
How to receive motion alerts?
In the Chacon Home app, enable motion detection and configure notifications. You will receive an alert on your phone when the camera detects motion.
What is the night vision range?
The camera has infrared LEDs allowing night vision up to 10 meters in complete darkness.
How to clean the camera?
Use a soft, dry cloth to clean the lens and housing. Do not use chemical or abrasive products that could damage the camera.
What to do if the camera does not connect?
Check that your Wi-Fi is on 2.4 GHz, that you are close to the camera, and that the password is correct. Reset the camera and try again. If the problem persists, contact Chacon support.
User questions about IPCAM-BE01 CHACON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual IPCAM-BE01 - CHACON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPCAM-BE01 by CHACON.
USER MANUAL IPCAM-BE01 CHACON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CHACON
Model : IPCAM-BE01
Category : Surveillance Camera