DigiPlus UHD S - Receiver TECHNISAT - Free user manual and instructions
Find the device manual for free DigiPlus UHD S TECHNISAT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Satellite Receiver |
| Brand | TechniSat |
| Model | DigiPlus UHD S |
| Category | Receiver |
| Dimensions (approx.) | 250 x 150 x 40 mm |
| Weight (approx.) | 0.5 kg |
| Power Supply | 12V DC, 1A (external adapter) |
| Power Consumption | 10 W (typical) |
| Inputs | LNB (F-type), HDMI, USB 2.0, Ethernet |
| Outputs | HDMI (4K), Optical (S/PDIF) |
| Supported Standards | DVB-S2/S2X, HEVC/H.265, MPEG-4 |
| Resolution | 4K UHD (3840x2160), HDR10 |
| Recording | USB recording (PVR-ready) |
| Connectivity | Wi-Fi (built-in), Ethernet 10/100 |
| Remote Control | Infrared, included |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 20% to 80% (non-condensing) |
| Care and Cleaning | Wipe with a soft, dry cloth; avoid liquids |
| Safety | Use only supplied power adapter; do not open the casing |
| Spare Parts | Remote control, power adapter available from TechniSat |
| Repairability | Refer to authorized service centers; user-replaceable remote batteries |
Frequently Asked Questions - DigiPlus UHD S TECHNISAT
How do I connect the DigiPlus UHD S to my TV?
Use an HDMI cable (not included) to connect the HDMI output on the receiver to an HDMI input on your TV. Ensure the TV is set to the correct input source.
Why isn't my receiver receiving any channels?
First, verify the satellite dish is correctly aligned and the LNB cable is securely connected to the LNB IN port. Then run an automatic channel search from the setup menu.
Can I record programs with this receiver?
Yes, the DigiPlus UHD S supports USB recording. Connect a USB storage device (formatted to FAT32 or ext4) to the USB port and use the recording function from the remote control.
How do I update the firmware?
Download the latest firmware from the TechniSat support website onto a USB stick. Insert the stick into the receiver, go to Settings > Software Update, and select USB update.
The remote control is not working. What should I do?
Check the batteries in the remote control; replace if needed. Ensure there are no obstacles between the remote and the receiver. If still not working, try pairing the remote again (see manual).
How do I reset the receiver to factory defaults?
Go to Settings > System > Factory Reset. Enter the default PIN (usually 0000) and confirm. This will erase all saved channels and preferences.
What should I do if I see 'No Signal' on the screen?
Check the LNB cable connection and ensure the dish is properly aligned. Also verify that the correct satellite is selected in the installation menu.
Does this receiver support HDR?
Yes, the DigiPlus UHD S supports HDR10 for compatible content when connected to an HDR-capable TV via HDMI.
Can I connect to the internet via Wi-Fi?
Yes, the receiver has built-in Wi-Fi. Go to Settings > Network > Wi-Fi Setup to scan and connect to your wireless network.
Where can I find the user manual for the DigiPlus UHD S?
The user manual is available for free download on notice-facile.com. Search for 'TechniSat DigiPlus UHD S' and select your preferred language.
User questions about DigiPlus UHD S TECHNISAT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DigiPlus UHD S - TECHNISAT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DigiPlus UHD S by TECHNISAT.
USER MANUAL DigiPlus UHD S TECHNISAT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TECHNISAT
Model : DigiPlus UHD S
Category : Receiver