ML-56 CDM - Projector Eurolite - Free user manual and instructions
Find the device manual for free ML-56 CDM Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spot Projector |
| Model | Eurolite ML-56 CDM |
| Light Source | 150W CDM lamp |
| Dimensions (L x W x H) | 500 x 400 x 300 mm |
| Weight | 15 kg |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | 250 W |
| DMX Control | Yes, via 3-pin XLR |
| Movement Range | Pan: 540°, Tilt: 270° |
| Gobos | 7 rotating gobos + open |
| Colors | 8 dichroic filters + white |
| Focus | Motorized |
| Strobe | 1-20 flashes per second |
| Dimmer | 0-100% linear |
| Housing Material | Metal and flame-retardant plastic |
| Cooling | Built-in fan |
| Maintenance | Clean lens and housing with dry cloth; avoid solvents |
| Safety | Use safety cable; ensure proper ventilation; disconnect before service |
| Spare Parts | Lamp, fuse, gobos available from Eurolite |
| Operating Temperature | 0-40°C |
| IP Rating | IP20 (indoor use only) |
| Included Accessories | Power cord, DMX cable, mounting bracket, manual |
Frequently Asked Questions - ML-56 CDM Eurolite
How do I replace the CDM lamp in the ML-56 CDM?
Disconnect power, allow lamp to cool, remove lamp cover, carefully pull out old lamp, insert new lamp (100-150W CDM), secure cover, and reset lamp timer if applicable. Use only Eurolite approved lamps.
The projector is not responding to DMX. What should I check?
Ensure DMX cables are properly connected and terminated. Check that the DMX address matches the controller. Try a DMX terminator on the last fixture. Also verify the projector's DMX mode is set correctly.
How do I clean the lens and housing?
Use a soft, lint-free dry cloth. For stubborn dirt, lightly dampen with water. Never use alcohol, solvents, or abrasive cleaners. Clean the lens gently to avoid scratches.
What does the error code 'Lamp' on the display mean?
This indicates the lamp is not igniting or has failed. Check lamp connections, replace lamp if necessary, and ensure the lamp timer has not expired. If problem persists, contact Eurolite service.
Can I use the ML-56 CDM outdoors?
No, this fixture is rated IP20 and is intended for indoor use only. Exposure to moisture or dust can cause damage and create safety hazards.
How do I reset the projector to factory settings?
Access the menu via the control panel, navigate to 'Settings' or 'Reset', select 'Factory Reset', and confirm. All DMX settings and custom programs will be erased.
The projector is overheating. What should I do?
Check that the ventilation slots are not blocked. Ensure the ambient temperature is below 40°C. Clean the fan and vents. If overheating persists, reduce the strobe frequency or dimmer level, and consult the user manual for specific limits.
How do I set the DMX address?
Press the Menu button until 'DMX Address' appears. Use the up/down buttons to set the desired address (001-512). Press Enter to confirm. The display will show the current address.
What is the best way to mount the projector?
Use the included mounting bracket and secure it to a truss or rig via an appropriate clamp. Always attach a safety cable to the fixture and to the structure. Ensure the mounting surface can support 15 kg.
The gobos are not rotating. How can I fix this?
Check the gobo wheel for obstructions. Ensure that the gobo rotation function is enabled in the DMX channel assignment. If the issue remains, the motor may be faulty; contact Eurolite technical support for repair.
User questions about ML-56 CDM Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual ML-56 CDM - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ML-56 CDM by Eurolite.
USER MANUAL ML-56 CDM Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : ML-56 CDM
Category : Projector