GS-1108 - Switch LANCOM - Free user manual and instructions
Find the device manual for free GS-1108 LANCOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | LANCOM |
| Model | GS-1108 |
| Number of Ports | 8 x 10/100/1000 Mbps Gigabit Ethernet |
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | Up to 9K bytes |
| Form Factor | Desktop or wall-mountable |
| Dimensions (W x D x H) | 180 x 120 x 35 mm |
| Weight | 0.5 kg |
| Power Supply | External adapter, 5V DC, 1A |
| Power Consumption | Max 5W |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Activity per port |
| Management | Unmanaged (plug and play) |
| Fanless Design | Yes (silent operation) |
| Housing Material | Metal |
| Safety & Compliance | CE, FCC, IEEE 802.3/3u/3ab |
| Warranty | 2 years |
| Package Contents | Switch, power adapter, quick start guide |
Frequently Asked Questions - GS-1108 LANCOM
How do I reset the LANCOM GS-1108 to factory defaults?
To reset the switch, press and hold the reset button (located on the front or rear panel) for about 10 seconds using a paperclip. The device will reboot and restore default settings. Note that this is an unmanaged switch, so resetting may not be necessary for normal operation.
Can I mount the GS-1108 on a wall?
Yes, the switch has mounting holes on the bottom for wall installation. Use appropriate screws (not included) and ensure the wall can support the weight (0.5 kg). Keep ventilation clear.
What is the maximum cable length for the Ethernet ports?
The switch supports standard Ethernet cable lengths up to 100 meters (328 feet) per port when using Cat5e or higher cabling.
Does the GS-1108 support Power over Ethernet (PoE)?
No, the LANCOM GS-1108 is a non-PoE switch. It does not provide power to connected devices. Use a separate PoE injector or a PoE switch if needed.
Why are the link lights not turning on when I connect devices?
Check that the Ethernet cable is properly connected and functioning. Try a different cable or port. Ensure the connected device is powered on and has a working network interface. If the issue persists, the switch may need a power cycle.
How do I update the firmware of the GS-1108?
The GS-1108 is an unmanaged switch and does not have a user-accessible firmware update mechanism. It operates with factory firmware and does not require updates for normal use.
Is the switch plug-and-play?
Yes, the GS-1108 is fully plug-and-play. Simply connect power and Ethernet cables; no configuration is needed. It auto-negotiates speed and duplex settings.
What is the power consumption of the switch?
The switch consumes a maximum of 5 watts, making it energy-efficient. It uses an external power adapter (5V DC, 1A).
Can I use the switch in a high-temperature environment?
The operating temperature range is 0°C to 40°C. Avoid placing it in direct sunlight or near heat sources. Ensure adequate ventilation.
What should I do if the switch stops working?
First, power cycle the switch by unplugging it for 30 seconds. Check all cables and connected devices. If the problem persists, contact LANCOM support. The switch has a 2-year warranty.
User questions about GS-1108 LANCOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS-1108 - LANCOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-1108 by LANCOM.
USER MANUAL GS-1108 LANCOM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LANCOM
Model : GS-1108
Category : Switch