GS-4554XUP - Switch LANCOM - Free user manual and instructions
Find the device manual for free GS-4554XUP LANCOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model | GS-4554XUP |
| Brand | LANCOM |
| Ports | 48 x 10/100/1000BASE-T (RJ45) + 4 x 10G SFP+ uplinks |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | Yes, up to 4096 VLANs |
| Power Supply | AC 100-240V, 50/60Hz, internal |
| Power Consumption | Max 50W |
| Dimensions (W x D x H) | 440 x 260 x 44 mm (1U) |
| Weight | 4.5 kg |
| Operating Temperature | 0°C to 45°C |
| Cooling | Internal fans with smart speed control |
| Management | Web GUI, CLI (SSH/Telnet), SNMP v1/v2c/v3 |
| Security Features | ACL, 802.1X, RADIUS, TACACS+ |
| Warranty | 2 years limited |
| Included Accessories | Power cord, rack mount kit, console cable, quick start guide |
| Cleaning Instructions | Disconnect power, use dry soft cloth; do not use liquid cleaners |
| Maintenance | Ensure ventilation openings are clear; no user-serviceable parts inside |
| Spare Parts & Repairability | Contact LANCOM support for replacements; repairs by authorized technicians only |
Frequently Asked Questions - GS-4554XUP LANCOM
What is the default IP address of the LANCOM GS-4554XUP?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for at least 10 seconds using a pointed object. The device will reboot with factory settings.
Does the GS-4554XUP support Power over Ethernet (PoE)?
No, this model is a non-PoE switch. All ports are standard Ethernet ports without PoE capability.
How can I update the firmware?
Download the latest firmware from the LANCOM support website. Access the web interface, go to Administration > Firmware Update, and upload the file.
What VLANs are supported?
The switch supports up to 4096 VLANs based on IEEE 802.1Q tagging. You can configure port-based and protocol-based VLANs.
How do I configure link aggregation?
Use the web interface under Port Configuration > Link Aggregation to create LAG groups. Supported modes: static and LACP (802.3ad).
Can I manage the switch via SSH?
Yes, SSH access is enabled by default. The default username is admin and password is admin (change on first login).
What is the maximum number of MAC addresses the switch can learn?
The switch can learn up to 16,000 MAC addresses in its forwarding table.
How to perform a factory reset without the reset button?
You can perform a factory reset via the CLI by entering execute reset config in privileged mode, or via the web interface under Administration > Factory Reset.
Does the switch support stacking?
No, the GS-4554XUP is a standalone switch and does not support stacking. It can be managed via a single IP address.
User questions about GS-4554XUP LANCOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS-4554XUP - LANCOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-4554XUP by LANCOM.