PSMS 2100 - Saw Power Craft - Free user manual and instructions
Find the device manual for free PSMS 2100 Power Craft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sliding Mitre Saw |
| Brand | Power Craft |
| Model | PSMS 2100 |
| Power Input | 2100 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Blade Diameter | 254 mm (10") |
| No-Load Speed | 4800 RPM |
| Cut Capacity at 90° | 120 mm height x 280 mm width |
| Cut Capacity at 45° | 80 mm height x 280 mm width |
| Bevel Range | 0° to 45° left |
| Miter Range | 0° to 45° left and right |
| Weight | 18 kg |
| Dimensions (L x W x H) | 650 x 450 x 400 mm |
| Cable Length | 2 m |
| Laser Guide | Yes, integrated |
| Dust Extraction | Dust bag included, 36 mm port |
| Safety Features | Blade guard, electric brake, lock-off switch |
| Maintenance | Clean after use, check blade alignment, lubricate sliding rails |
| Spare Parts Availability | Blades, carbon brushes, guards available online |
Frequently Asked Questions - PSMS 2100 Power Craft
How do I change the blade on the Power Craft PSMS 2100?
Unplug the saw. Use the spindle lock to prevent rotation. Loosen the arbor bolt with the supplied wrench. Remove the outer flange and old blade. Install the new blade with teeth facing forward, then reattach flange and tighten bolt.
How do I adjust the miter angle?
Loosen the miter lock handle, rotate the table to the desired angle (up to 45° left/right), and tighten the lock handle. Ensure the bevel scale is zeroed if needed.
How do I adjust the bevel angle?
Unscrew the bevel lock knob, tilt the saw head to the desired angle (0-45° left), and retighten the knob. Check the pointer for accuracy.
The laser guide is not working. What should I do?
First, check if the laser is turned on (usually a switch on the handle). Replace the batteries if required. If still not working, consult the manual for alignment or contact customer support.
Can I use a different blade size?
It is recommended to use only 254 mm (10 inch) blades with a 30 mm arbor. Using other sizes may compromise safety and performance.
How do I connect a dust extractor?
The saw has a 36 mm dust port. Attach the hose from a vacuum or dust extractor directly, or use the included dust bag for passive collection.
What safety precautions should I take?
Always wear safety goggles and hearing protection. Keep hands away from the blade path. Use the trigger lock-off. Never leave the saw unattended while running. Secure the workpiece.
The blade wobbles or makes excessive noise.
Check that the blade is properly tightened and not damaged. Verify the arbor flange is clean. If the blade is bent, replace it. Also ensure the saw is on a stable surface.
How do I replace the carbon brushes?
Disconnect the saw. Remove the brush caps on the motor housing. Pull out the old brushes, insert new ones, and replace the caps. Run the saw for a few minutes to seat them.
What is the warranty period for the Power Craft PSMS 2100?
Power Craft typically offers a 2-year warranty for DIY tools. Check your purchase receipt for exact terms and conditions.
User questions about PSMS 2100 Power Craft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual PSMS 2100 - Power Craft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSMS 2100 by Power Craft.
USER MANUAL PSMS 2100 Power Craft
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Power Craft
Model : PSMS 2100
Category : Saw