TS 720/1 - Saw Power Craft - Free user manual and instructions
Find the device manual for free TS 720/1 Power Craft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Table Saw |
| Brand | Power Craft |
| Model | TS 720/1 |
| Power | 720 W |
| Blade Diameter | 255 mm (10 inches) |
| Max Cutting Depth at 90° | Approx. 75 mm |
| Max Cutting Depth at 45° | Approx. 55 mm |
| No-Load Speed | 4800 rpm |
| Table Dimensions | Approx. 600 x 500 mm |
| Weight | Approx. 22 kg |
| Rip Fence | Yes, adjustable |
| Miter Gauge | Yes, with stop |
| Blade Guard | Yes, with anti-kickback pawls |
| Dust Extraction Port | Yes, 36 mm diameter |
| Power Cord Length | 2.5 m |
| Safety Switch | No-volt release switch |
| Maintenance | Periodic blade cleaning, table lubrication, and electrical check |
| Spare Parts Availability | Contact Power Craft service or authorized dealers |
Frequently Asked Questions - TS 720/1 Power Craft
How do I change the saw blade on the Power Craft TS 720/1?
Unplug the saw. Loosen the arbor nut using the provided wrench, remove the outer flange and old blade. Install new blade with teeth rotating downward toward the front, replace flange and tighten arbor nut. Reinstall blade guard.
What is the maximum cutting depth of the TS 720/1?
At 90°, the maximum cutting depth is approximately 75 mm. At 45°, it reduces to about 55 mm. Always adjust blade height accordingly.
Can I use a dado blade with this saw?
No, the TS 720/1 is not designed for dado blades. Only standard circular saw blades with 5/8 inch arbor are recommended.
How do I adjust the rip fence?
Loosen the fence locking lever, slide the fence to the desired distance from the blade, and re-tighten the lever. Ensure the fence is parallel to the blade for accurate cuts.
Why is the saw not starting?
Check the power cord and plug for damage. Ensure the safety switch is in the 'ON' position and the no-volt release is reset. If still not starting, consult a qualified electrician.
How often should I clean the dust extraction ports?
Clean after each use to prevent sawdust buildup, which can reduce performance. Use a vacuum or compressed air to clear the ports and hose.
Is the TS 720/1 suitable for cutting aluminium?
Yes, but only with a specific non-ferrous metal cutting blade. Ensure proper lubrication (e.g., wax) and reduce feed rate to avoid overheating.
How do I store the saw safely?
Always unplug after use. Retract the blade fully, engage the blade guard, and store in a dry location. Keep the table clean and apply light oil to prevent rust.
What type of blade is included with the saw?
The saw comes with a 24-tooth carbide-tipped general purpose blade suitable for softwood and hardwood. Replace with similar blades for best performance.
Where can I find replacement parts?
Contact Power Craft customer service or visit their official website. Authorized dealers also stock spare parts like blades, belts, and switches.
User questions about TS 720/1 Power Craft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual TS 720/1 - Power Craft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS 720/1 by Power Craft.
USER MANUAL TS 720/1 Power Craft
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Power Craft
Model : TS 720/1
Category : Saw