LED KLS Scan Next FX - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED KLS Scan Next FX Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Scan/Effect Light |
| Brand | Eurolite |
| Model | LED KLS Scan Next FX |
| Dimensions (approx.) | 330 x 270 x 420 mm |
| Weight | 6.5 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 120 W |
| Light Source | 10 W RGBW LEDs (8 pcs) |
| DMX Channels | 12/15/21 selectable |
| Control Modes | DMX, Sound-to-Light, Auto, Master/Slave |
| Strobe Rate | 1-20 Hz |
| Pan Range | 540° |
| Tilt Range | 270° |
| Cooling | Fan cooled |
| Fuse | F2A 250V 5x20 mm |
| IP Rating | IP20 (indoor use) |
| Mounting | Floor or truss mount with omega brackets |
| Safety Features | Safety cable attachment point, auto reset after power interruption |
| Maintenance | Clean lens with soft cloth; periodic fan and ventilation check |
| Spare Parts Available | LED modules, power supply, control board |
| General Information | Ideal for mobile DJs, clubs, and stage lighting |
Frequently Asked Questions - LED KLS Scan Next FX Eurolite
How do I connect the LED KLS Scan Next FX to a DMX controller?
Use standard 3-pin XLR cables. Connect the DMX IN of the fixture to the DMX OUT of your controller. Set the fixture's DMX address via the menu. Ensure termination on the last fixture.
Can I use this light in sound-to-light mode?
Yes, select Sound mode via the menu. The built-in microphone picks up music beats and triggers automated effects.
What is the recommended cleaning method for the lens?
Disconnect power. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid abrasive materials. Clean the lens gently to avoid scratches.
How many DMX channels does the fixture use?
The fixture can operate in 12, 15, or 21 channel modes. Refer to the manual's DMX chart for specific channel assignments.
What is the power consumption of the LED KLS Scan Next FX?
The power consumption is approximately 120 W. It uses an auto-switching power supply suitable for AC 100-240 V.
Can I mount this fixture on a truss?
Yes, it comes with omega brackets for truss mounting. Always secure the fixture with a safety cable rated for at least 10 times the fixture's weight.
How do I reset the fixture to factory settings?
Enter the menu, navigate to 'Settings' or 'Reset', and select 'Factory Default'. Confirm the selection. The fixture will reboot.
What should I do if the fixture stops responding?
Check power and DMX connections. Try a power cycle (unplug for 10 seconds). If the issue persists, check the fuse or contact support.
Are spare parts available for this model?
Yes, Eurolite offers spare parts such as LED modules, power supply units, and control boards. Contact an authorized dealer.
What is the maximum ambient temperature for operation?
The maximum safe ambient temperature is 40°C (104°F). Ensure adequate ventilation and do not block cooling vents.
User questions about LED KLS Scan Next FX Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED KLS Scan Next FX - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED KLS Scan Next FX by Eurolite.
USER MANUAL LED KLS Scan Next FX Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED KLS Scan Next FX
Category : Lighting