Eurolite

STV-20 - Lighting Eurolite - Free user manual and instructions

Find the device manual for free STV-20 Eurolite in PDF.

📄 14 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Eurolite STV-20 - page 9
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Strobe Light
Model STV-20
Brand Eurolite
Power Supply AC 100-240V, 50/60Hz
Power Consumption 20W
Light Source 20W LED (white)
Flash Rate 1-20 flashes per second
DMX Channels 1 or 2 channels
Control Modes DMX, Master/Slave, Sound-activated, Auto
Dimensions (L x W x H) 250 x 180 x 120 mm
Weight 1.2 kg
Housing Material Metal
Cooling Passive convection
Protection Rating IP20 (indoor use only)
Mounting Options Floor stand, truss clamp (optional)
Safety Features Overheat protection, safety cable attachment point
Included Accessories Power cord, user manual
Maintenance Clean exterior with dry cloth; no internal user-serviceable parts
Spare Parts Contact Eurolite service for replacement LEDs or power supply

Frequently Asked Questions - STV-20 Eurolite

How do I connect the STV-20 to a DMX controller?
Use a standard 3-pin XLR cable. Connect the DMX input of the fixture to the output of your controller. Set the DMX address using the DIP switches or menu (refer to manual).
Can I use the STV-20 without DMX?
Yes, you can use standalone modes: sound activation via built-in microphone, auto mode with adjustable speed, or master/slave mode for multiple units.
What is the maximum flash rate?
The maximum flash rate is 20 flashes per second. The rate can be adjusted via DMX or onboard controls.
How do I clean the fixture?
Disconnect from power before cleaning. Use a soft dry cloth to wipe the housing. Do not use liquid cleaners or spray directly.
What safety precautions should I take?
Always mount securely with a safety cable. Do not stare directly at the light. Keep away from flammable materials. Ensure proper ventilation.
Can I replace the LED myself?
The LED is not user-replaceable. If it fails, contact Eurolite service or a qualified technician for repair.
How many STV-20 units can be daisy-chained?
You can daisy-chain up to 8 units in master/slave mode. For DMX, each unit requires a unique address and DMX signal can be daisy-chained to many devices.
Does the STV-20 have a power switch?
Yes, there is a power switch on the rear panel to turn the unit on and off.
What type of fuse does it use?
It uses a 5x20mm glass fuse, typically 1A slow-blow. Check the manual for exact rating.
Is the STV-20 suitable for outdoor use?
No, it is rated IP20 for indoor use only. Keep it dry and avoid exposure to rain or moisture.

User questions about STV-20 Eurolite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual STV-20 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STV-20 by Eurolite.

USER MANUAL STV-20 Eurolite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eurolite

Model : STV-20

Category : Lighting