RoboSHOT 30E-M - Video Conferencing System Vaddio - Free user manual and instructions
Find the device manual for free RoboSHOT 30E-M Vaddio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PTZ Video Conferencing Camera |
| Model | RoboSHOT 30E-M |
| Brand | Vaddio |
| Optical Zoom | 30x |
| Digital Zoom | 12x |
| Max Resolution | 1920 x 1080p (Full HD) |
| Frame Rate | 60 fps (1080p) |
| Image Sensor | 1/2.8-inch Exmor CMOS |
| Horizontal Field of View | 63.7° (wide end) |
| Video Outputs | HDMI, 3G-SDI, IP (USB optional) |
| Control Interface | RS-232, RS-422, IP (Telnet or VISCA) |
| Pan Range | ±170° |
| Tilt Range | -30° to +90° |
| Preset Positions | 16 |
| Input Power | PoE+ (IEEE 802.3at) or 12V DC (optional) |
| Power Consumption | 12W (typical) |
| Dimensions (W x H x D) | 7.2 x 6.9 x 5.8 in (183 x 175 x 148 mm) |
| Weight | 3.5 lb (1.6 kg) |
| Mounting Options | Tabletop, ceiling (mount bracket included) |
| Security Features | HTTPS, 802.1x authentication, password protection |
| Maintenance & Cleaning | Use a soft, dry cloth; avoid solvents; wipe lens with lens cleaning paper |
| Repairability & Spare Parts | Spare parts available through Vaddio distributor; repair by authorized service |
| Warranty | Limited 5-year warranty |
Frequently Asked Questions - RoboSHOT 30E-M Vaddio
How do I set up the RoboSHOT 30E-M for the first time?
Connect the camera to your network using PoE+ or a 12V power supply. Use HDMI or SDI for video output. Access the web interface via the camera's IP for configuration. Refer to the Quick Start Guide for detailed steps.
Can I control the camera via USB?
The RoboSHOT 30E-M does not have a native USB port. Use the optional USB 3.0 Bridge (AV Bridge) for USB video output. The unit supports IP, RS-232, and RS-422 control.
What is the maximum zoom level?
It has a 30x optical zoom and a 12x digital zoom, providing a combined 360x zoom. For best quality, use optical zoom only.
How do I mount the camera on the ceiling?
Use the included ceiling mount bracket. Attach the bracket to a solid ceiling, then slide the camera onto the bracket until it clicks. Ensure the safety wire is attached to prevent falls.
Does the camera support Power over Ethernet (PoE)?
Yes, it supports PoE+ (IEEE 802.3at). Ensure your switch provides PoE+ or use a PoE injector. No separate power cable needed.
How do I update the firmware?
Download the latest firmware from the Vaddio website. Access the camera's web interface, go to Settings > Firmware Upgrade, and upload the file. Do not power off during update.
What video resolutions are supported?
The camera supports up to 1920x1080p at 60 fps. Lower resolutions like 720p and 480p are also available. Video output can be configured via web interface or serial commands.
Can I use the camera with third-party control systems?
Yes, it works with Crestron, Extron, AMX, and other systems via VISCA over RS-232/422 or IP (Telnet). Example commands are in the manual.
How do I clean the lens?
Use a lens cleaning pen or a soft microfiber cloth slightly dampened with lens cleaning solution. Wipe gently in a circular motion. Do not use harsh chemicals.
What should I do if the camera does not power on?
Check if the PoE switch is active and supplying power (12W). For DC power, verify the adapter is plugged in. Try a different Ethernet cable or port. If still off, contact Vaddio support.
User questions about RoboSHOT 30E-M Vaddio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video Conferencing System in PDF format for free! Find your manual RoboSHOT 30E-M - Vaddio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RoboSHOT 30E-M by Vaddio.