LED PLL-704 - Lamp Eurolite - Free user manual and instructions
Find the device manual for free LED PLL-704 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Brand | Eurolite |
| Model | LED PLL-704 |
| Dimensions (approx.) | 250 x 250 x 300 mm |
| Weight (approx.) | 2.5 kg |
| Power Consumption | 72 W |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Light Source | LED, RGBW (estimated) |
| Beam Angle | 25° |
| DMX Channels | 8 (estimated) |
| Control | DMX512, Stand-alone, Master/Slave |
| Housing Material | Aluminum, Steel |
| Protection Rating | IP20 (indoor use only) |
| Cooling | Passive convection |
| Installation Options | Floor stand, hanging bracket (not included) |
| Maintenance | Clean with dry, lint-free cloth; avoid liquids |
| Safety | Use correct voltage; do not cover; keep away from moisture |
| Spare Parts | LED module, power supply (contact service) |
| Repairability | Replacement of LED modules and power supply by qualified technician |
Frequently Asked Questions - LED PLL-704 Eurolite
How do I connect the LED PLL-704 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN of the fixture to the DMX OUT of your controller. Set the DMX address via the menu on the device. Consult the manual for address range.
What is the power consumption of the Eurolite LED PLL-704?
The power consumption is approximately 72 watts at full output. The fixture accepts 100-240 V AC, 50/60 Hz.
How do I clean the fixture?
Disconnect power and allow to cool. Use a soft, dry lint-free cloth to wipe the housing and lens. Do not use liquids or abrasive cleaners.
What is the beam angle of the LED PLL-704?
The beam angle is 25 degrees, making it suitable for stage washes and accent lighting.
Can I use the LED PLL-704 outdoors?
No, this fixture is rated IP20 for indoor use only. Protect it from rain, moisture, and extreme temperatures.
How do I replace the fuse?
Disconnect power. The fuse holder is typically located next to the power input. Replace with a fuse of the same type and rating (e.g., T2.5A/250V). If it blows again, check for internal damage.
How do I set the DMX address?
Press the menu button to enter the setup. Use up/down buttons to select DMX Address. Set a unique address between 1 and 512. Press enter to confirm.
What is the warranty on the Eurolite LED PLL-704?
Eurolite typically offers a 2-year warranty against manufacturing defects. Proof of purchase is required.
How do I mount the LED PLL-704?
Use a stable tripod or hanging bracket (not included). Secure the fixture with the mounting screw. Ensure the mounting surface can support at least 10 kg for safety.
What should I do if the fixture does not light up?
Check power connections, fuse, and DMX cable. Ensure the DMX address is correct and the controller is sending data. If using standalone mode, verify the internal program is activated.
User questions about LED PLL-704 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual LED PLL-704 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PLL-704 by Eurolite.
USER MANUAL LED PLL-704 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED PLL-704
Category : Lamp