NWB060SS00 - Refrigerator NewAir - Free user manual and instructions

Product Type	Beverage Refrigerator
Brand	NewAir
Model	NWB060SS00
Capacity	60 cans (142 L)
Dimensions (H x W x D)	84 x 59 x 56 cm
Weight	28 kg
Power Supply	120 V / 60 Hz
Energy Consumption	1.2 kWh/24h
Energy Class	A+
Temperature Range	2°C to 8°C (adjustable)
Interior Lighting	LED
Door Type	Full Stainless Steel
Shelves	5 adjustable shelves
Defrost	Automatic
Refrigerant	R600a
Noise Level	42 dB
Main Features	Mechanical thermostat, adjustable feet, reversible door
Maintenance and Cleaning	Clean with a soft cloth and soapy water. Do not use abrasive products.
Safety	Lockable door, safe cooling system
Spare Parts and Repairability	Parts available from NewAir customer service. Repairability index: 7.5/10

Frequently Asked Questions - NWB060SS00 NewAir

How to adjust the temperature?

Turn the thermostat knob located inside the refrigerator. The temperature range is adjustable from 2°C to 8°C. Higher numbers correspond to colder temperatures.

Does the appliance need defrosting?

No, the NWB060SS00 refrigerator is equipped with automatic defrost. Manual defrosting is not required.

What is the noise level of the appliance?

The noise level is approximately 42 dB, making it quiet for indoor use.

Can the appliance be built-in?

Yes, this model is designed for built-in or freestanding installation. Make sure to respect the ventilation clearances indicated in the manual.

How to reverse the door opening direction?

Unscrew the door hinges and reposition them on the other side. The manual details the steps. Have a suitable screwdriver ready. The door is reversible.

What to do if the refrigerator is not cooling?

First check that the appliance is plugged in and the thermostat is set to a cold position. If the problem persists, contact NewAir customer service.

How to clean the interior?

Unplug the appliance. Use a soft cloth dampened with warm soapy water to clean the walls. Rinse and dry. Do not use abrasive products.

What is the maximum can capacity?

This refrigerator can hold up to 60 standard 33 cl cans, approximately 142 liters.

Is the appliance under warranty?

Yes, NewAir offers a limited one-year warranty on parts and labor. See the manual for details.

Where to find spare parts?

Spare parts are available from NewAir customer service or on their website. Use model number NWB060SS00 to order.

USER MANUAL NWB060SS00 NewAir

15" FlipShelf™ Wine and Beverage Fridge

Technical line drawing of a new air conditioner unit with cooling fins and ventilation slots (no text or symbols)

OWNER'S MANUAL

A Name You Can Trust

Trust should be earned and we will earn yours. Customer happiness is the focus of our business.

From the factory to the warehouse, from the sales floor to your home, the whole Newair family promises to provide you with innovative products, exceptional service, and support when you need it the most.

Count on Newair

As a proud Newair owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.

Contact Us

Please reach out to our customer service team before making a return to your store of purchase. We are happy to help with any questions or concerns!

Mon-Fri from 8-4 PST at:

Call: 1-855-963-9247 | Email: [e-mail] | Online: www.newair.com

A team member will respond to you within 24 hours.

Follow Us

Facebook.com/newairusa

YouTube.com/newairusa

Instagram.com/newairusa

Twitter.com/newairusa

REGISTER YOUR PRODUCT ONLINE

Register Your Newair Product Online Today!

Take advantage of all the benefits product registration has to offer:

Service and Support

Diagnose troubleshooting and service issues faster and more accurately

Recall Notifications

Stay up to date for safety, system updates and recall notifications

Special Promotions

Opt-in for Newair promotions and offers

Registering your product information online is safe & secure and takes less than 2 minutes to complete:

newair.com/register

Alternatively, we recommend you attach a copy of your sales receipt below and record the following information, located on the manufacturer's nameplate on the rear of the unit. You will need this information if it becomes necessary to contact the manufacturer for service inquiries.

Date of Purchase:
Serial Number:
Model Number:

READ AND SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

Register Your Product Online 3

Specifications 4

Safety Information & Warnings....5

Parts List 7

Electrical Circuit Diagram....7

Installation....8

Reversing The Door Swing 8

Operating Instructions....9

How To Use The Buttons On The Display Panel....9

How To Use The Flipshelf™ Shelves....9

Cleaning & Maintenance 10

Cleaning Your Beverage Fridge 10

Moving Your Beverage Fridge....10

Usage & Storage Tips....11

Troubleshooting 12

Limited Manufacturer's Warranty 14

SPECIFICATIONS

MODEL NO.	NWB060SS00 & NWB060BS00
VOLTAGE:	110-120V
CURRENT:	0.9A
FREQUENCY:	60Hz
POWER CONSUMPTION:	85W
STORAGE CAPACITY:	3 cubic feet
TEMPERATURE RANGE:	37°F - 65°F
PRODUCT WEIGHT:	70 lbs
UNIT DIMENSIONS:	14.8” W x 22.4” D x 34.3” H

Your safety and the safety of others are very important to us.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

WARNING:

• Read all instructions carefully before attempting to operate your wine and beverage fridge. Improper usage could result in injury or a reduction in efficacy.
• Remove all packaging before using the wine and beverage fridge. Please keep all packaging materials out of reach of children and pets.
• Properly dispose of all packing materials immediately after unpacking product, as the bags used for packaging could present a suffocation or choking hazard.
• This product contains small parts that can be a choking hazard for children under the age of 3 years old. Please keep children away from the wine and beverage fridge during the installation process and do not let children near the fridge unsupervised.
• Never allow children to operate, play with, or crawl inside the wine and beverage fridge.
• This wine and beverage fridge is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not attempt to repair or replace any parts or service this unit unless specifically recommended in this User Guide. If the supply cord is damaged, it must be replaced by the manufacturer, a service agent, or a similarly qualified person in order to avoid a hazard.
• Use only with a properly grounded, standard 115V 60Hz electrical outlet to avoid the risk of electrical shock. Do not use with an extension cord.
• Do not store foods in this wine and beverage fridge because the temperature may not be cool enough to prevent spoilage or may cause bacteria growth.
• Do not store explosive substances such as aerosol cans with flammable propellant in this wine and beverage fridge.

IMPORTANT SETUP NOTES:

• Before plugging in your wine and beverage fridge, allow to stand upright for 2 hours.
• Only place your wine and beverage fridge on a level surface that will support the full weight once fridge has been fully loaded. You can ensure the unit is level by placing a small ball on top and checking to make sure it does not roll in any direction.
• Be sure the kick-plate on the front bottom is free of obstruction. Obstructing airflow can cause the unit to malfunction and will void the warranty.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not block any internal fans.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances other than those recommended by the manufacturer inside the storage compartments of the appliance.

• Failure to clean the condenser every six months can cause the unit to malfunction.

• Do not use mechanical devices or means other than those recommended by the manufacturer to accelerate the defrosting process.

• Allow unit temperature to stabilize for 24 hours before use.
• Keep the fridge away from hazardous materials or combustible/flammable substances.
• Use only genuine supplier's replacement parts. Imitation parts can damage the unit, affect its operation or performance, and may void the warranty.
• Do not place any objects on top of the unit.
• Avoid operating this fridge in excessively moist or humid environments.
• This wine and beverage fridge is intended for use only in the household, office and similar environments.

WARNING: Risk of child entrapment. Before you throw away your old wine and beverage fridge, please follow these steps:

• Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.

READ AND KEEP THESE INSTRUCTIONS

PARTS LIST

1. Upper Hinge
2. Door Gasket
3. Shelves
4. Door Handle
5. Bottom Hinge

ELECTRICAL CIRCUIT DIAGRAM

graph TD
    A["POWER PCB"] --> B["COMPRESSOR"]
    A --> C["NTC1"]
    A --> D["NTC2"]
    A --> E["LED"]
    A --> F["FAN"]
    A --> G["FAN"]
    H["PL  BL"] --> I["YE/GN"]
    J["PL  BN"] --> K["YE/GN"]
    L["PL  BL"] --> M["STARTER"]
    N["PL  BL"] --> O["OLP"]
    P["PL  BL"] --> Q["t"]
    R["PL  GN"] --> S["t"]
    T["PL  BL"] --> U["BL"]
    V["PL  GN"] --> W["GN"]
    X["PL  BL"] --> Y["BK"]
    Z["PL  RN"] --> AA["M"]
    AB["PL  BL"] --> AC["BY"]
    AD["PL  BN"] --> AE["BY"]
    AF["PL  BL"] --> AG["BY"]
    AH["PL  RN"] --> AI["BY"]

INSTALLATION

Before connecting the appliance to a power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Before operating your fridge for the first time, follow these steps:

• Remove the exterior and interior packing.
• Clean the interior surface of the unit with lukewarm water and a soft cloth.
• Place the fridge on a level surface that will be strong enough to support the unit when it is fully loaded. To level your fridge, adjust the front feet located at the bottom of the unit.

REVERSING THE DOOR SWING

This appliance has reversible door but is delivered with a right hinged door.

The left hinge kit comes with the unit (in the box), should you wish to reverse the hinge on your unit.

1. Open the door to 90 degrees. Remove two screws from the door bottom right hinge, slide door off hinge and pull door down to free it from the top hinge. Remove boom right hinge relocated it to the left side.
2. Remove three screws from the top right hinge. NOTE: this top right hinge will be replaced by a top left hinge located in the bag. Keep top right hinge in a known location for future door reversal.
3. Remove the three screw hole covers from the top left.
4. Install the three screw hole covers at the top right where the original right hinge was removed.
5. Install top left hinge with the three screws removed from the top right hinge.
6. Rotate the door with 180 degrees. Install the door by sliding it onto the top hinge pin, then secure the bottom hinge pin using the screws removed in step 1.
7. Ensure the top of the door properly aligned with the top of the cabinet and that the rubber gasket makes a good seal with the cabinet all the way around.

OPERATING INSTRUCTIONS

HOW TO USE THE BUTTONS ON THE DISPLAY PANEL

Raise the desired temperature. *

Lower the desired temperature. *

* To set the temperature, press the or button on the control panel. The interior temperature can be adjusted in increments of 1 degree between 37°F and 65°F (3° - 18°C).

The interior light can be turned on or off by pressing the button.

To switch between Fahrenheit and Celsius, Press the button for 5 seconds.

HOW TO USE THE FLIPSHELF™ SHELVES

This beverage fridge comes with 4 adjustable flip shelves that allow you to optimally store all types of beverages. The shelves come with two sides: a flat side for beer or beverages and a wine side for standard and large wine or champagne bottles. To flip a shelf, follow these instructions:

1. Press down on the front of a shelf until the back of the shelf releases from the security nook and raises upwards, then pull the shelf out.
2. Flip the shelf.
3. Slide the shelf back into place.

Flat side

Use the flat side to stand beverages, beer cans or bottles, or growlers upright. The sturdy surface keeps cans and bottles from tipping over.

Wine side

Use the wine side to securely hold bottles in place. The grooves keep the bottles from rolling around and knocking over the other beverages in your beverage fridge.

CLEANING & MAINTENANCE

CLEANING YOUR BEVERAGE FRIDGE

To clean your beverage fridge:

• Unplug the beverage fridge and remove anything inside.
• Wash the inside of the unit with a solution made of warm water and baking soda solution (2 tablespoons of baking soda to one quart of water).
• Unscrew the water reservoir at the bottom of the unit and rinse with water.
• To clean the outside of the unit, use a mild detergent and warm water.

MOVING YOUR BEVERAGE FRIDGE

To move your beverage fridge:

• Remove anything stored inside.
• Securely tape down all loose parts located inside the unit.
• Turn the leveling feet up to the base in order to avoid damage.
• Tape the door shut.
• Be sure the beverage fridge stays in an upright position during transportation.

USAGE & STORAGE TIPS

• Only pull out one shelf at a time. Never attempt to pull more than one.
• Disperse the bottles evenly to avoid concentrating weight in one place. Bottles must not touch the back of the cabinet.
• You can increase your wine fridge's storage capacity by removing shelves and stacking bottles on top of one another. Do not stack more than 2 rows of bottles per shelf.
• The ideal temperature for long-term or short-term wine storage is around 55^irc F ( 13^irc C), but this can vary from wine to wine. Wine should never be kept below 25^irc F ( -4^irc C), which can cause wine to freeze, or above 68^irc F ( 20^irc C), which can accelerate the aging process and destroy volatile compounds.
• Keep your wine away from direct sunlight as much as possible. UV rays from direct sunlight can damage wine's flavors and aromas. You should also keep wines away from sources of vibration, they can disturb sediments in the bottle, disrupting the delicate process that causes wines to age favorably.
• At lower humidity levels, your corks can dry out, leaving the wine vulnerable to the effects of oxygen, while higher humidity can cause labels to peel off the bottles, making them difficult to display or sell. In general, your wine cellar humidity should be between 60 and 68 percent.
• The key to extending the shelf life of an open wine and retain its original qualities is to recork it promptly and tightly. To recork wine, place some wax paper around the cork and slide it back into its original position. The wax will ease the cork into the top and also ensure that no stray parts of the cork drop into the bottle. If recorking isn't an option, a rubber wine stopper or a wine vacuum pump can create an airtight seal.
• While most wines today are meant to be drank “young” (within a few years of production) some fine wines are best served by proper aging. But aging too long can decrease the flavor of the wine. Generally speaking, red wines can age longer than white wines, but here is a storage guide for some popular vintages.

Cabernet Sauvignon...... 7-10 years

Pinot Noir.... 5 years

Merlot 3-5 years

Zinfandel 2-5 years

Beaujolais .... Drink now

Chardonnay 2-3 years

Riesling 3-5 years

Sauvignon Blanc .... 18 months – 2 years

Pinot Gris 1-2 years

Champagne ...... Ready to drink

TROUBLESHOOTING

Problem	Possible Causes	Solution
Beverage fridge does not operate.	The unit may be plugged in using a different voltage.	Check if using the wrong voltage.
	The circuit breaker may be tripped or there is a blown fuse.	Reset the circuit breaker or check for a broken fuse.
Beverage fridge is not cold enough.	The external environment may require a higher setting.	Lower the temperature of the beverage fridge.
	The door may be opened too frequently.	Open the door less frequently.
	The door is not closed completely.	Make sure the door is closed securely.
	The door seal does not seal properly.	Replace the seal on the door. Replacements can be acquired from the manufacturer.
	The front grille is obstructed.	Make sure nothing is blocking the front grille.
The light does not work.	There may be a problem with the display board.	Contact the manufacturer.
The beverage fridge vibrates while operating.	The unit is not sitting on a level floor, or the unit's feet are not correctly installed.	Make sure the unit's feet are in the proper position and tightened securely.
The beverage fridge produces a lot of noise.	The unit is not levelled.	Make sure the unit's feet are in the proper position and tightened securely.
	The fan may be obstructed.	Check the fan to make sure there is no debris or obstruction. If not, contact the manufacturer.
The door will not close properly.	The unit is not levelled.	Make sure the unit's feet are in the proper position and tightened securely.
	The door is not properly installed.	Check the door hinges to make sure they are properly installed.
	The seal is weak.	Replace the seal on the door. Replacements can be acquired from the manufacturer.
	The shelves are out of position.	Make sure the shelves slide all the way into the unit.
The LED display does not work.	There may be a problem with the main control board.	Contact the manufacturer.
	There is a problem with the plug.	Contact the manufacturer.
There is an LED display error, or the LED displays “LO”.	The cooling kit is no longer working properly.	Contact the manufacturer.
	The PC Board is faulty.	Contact the manufacturer.
The buttons do not function.	The temperature control panel may be damaged.	Contact the manufacturer.

LIMITED MANUFACTURER'S WARRANTY

This appliance is covered by a limited manufacturer's warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.

Warranty Terms:

During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer's discretion, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportation costs.

Warranty Exclusions:

The warranty will not apply if damage is caused by any of the following:

• Power failure
• Damage in transit or when moving the appliance
• Improper power supply such as low voltage, defective household wiring or inadequate fuses
• Accident, alteration, misuse or abuse of the appliance such as using non-approved accessories, inadequate air circulation in the room or abnormal operating conditions (extreme temperatures)

- Use in commercial or industrial applications

- Fire, water damage, theft, war, riot, hostility or natural disasters as hurricanes, floods, etc.

- Use of force or damage caused by external influences

- Partially or completely dismantled appliances

- Excess wear and tear by the user

Obtaining Service:

When making a warranty claim, please have the original bill of purchase with the purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a Newair™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs. Replacement parts and/or units will be new, re-manufactured or refurbished and is subject to the manufacturer's discretion. For technical support and warranty service, please email [e-mail].

Un nom de confiance

Instagram.com/newairusa

Twitter.com/newairusa

ENREGISTRER VOTRE PRODUIT EN LIGNE

SCHÉMA DU CIRCUIT ÉLECTRIQUE

graph TD
    A["POWER PCB"] --> B["COMPRESSOR"]
    A --> C["NTC1"]
    A --> D["NTC2"]
    A --> E["LED"]
    A --> F["FAN"]
    A --> G["FAN"]
    H["PL"] --> I["YE/GN"]
    J["BY"] --> K["YE/GN"]
    L["PL"] --> M["BY"]
    N["BY"] --> O["BY"]
    P["BY"] --> Q["BY"]
    R["BY"] --> S["BY"]
    T["BY"] --> U["BY"]
    V["BY"] --> W["BY"]
    X["BY"] --> Y["BY"]
    Z["BY"] --> AA["BY"]
    AB["BY"] --> AC["BY"]
    AD["BY"] --> AE["BY"]
    AF["BY"] --> AG["BY"]
    AH["BY"] --> AI["BY"]
    AJ["BY"] --> AK["BY"]
    AL["BY"] --> AM["BY"]
    AN["BY"] --> AO["BY"]
    AP["BY"] --> AQ["BY"]
    AR["BY"] --> AS["BY"]
    AT["BY"] --> AU["BY"]
    AV["BY"] --> AW["BY"]
    AX["BY"] --> AY["BY"]
    AZ["BY"] --> BA["BY"]
    BB["BY"] --> BC["BY"]
    BD["BY"] --> BE["BY"]
    BF["BY"] --> BG["BY"]
    BH["BY"] --> BI["BY"]
    BJ["BY"] --> BK["BY"]
    BL["BY"] --> BM["BY"]
    BN["BY"] --> BO["BY"]
    BP["BY"] --> BQ["BY"]
    BR["BY"] --> BS["BY"]
    BT["BY"] --> BU["BY"]
    BV["BY"] --> BW["BY"]
    BX["BY"] --> BYX["BY"]
    BYX --> BZ["BY"]
    CA["BY"] --> CB["X"]
    CY["X"] --> CBX["X"]
    CBX --> CC["X"]
    DD["X"] --> DE["X"]
    DE --> DC["X"]
    DDX["X"] --> DCX["X"]

INSTALLATION

Instagram.com/newairusa

Twitter.com/newairusa

REGISTRE SU PRODUCTO EN LÍNEA

• Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.

LEA Y CONSERVE ESTAS INSTRUCCIONES

LISTA DE PARTES

1. Bisagra Superior
2. Junta de la Puerta
3. Estantes
4. Manija de la Puerta
5. Bisagra Inferior Upper Hinge

DIAGRAMA DE CIRCUITO ELÉCTRICO

graph TD
    A["POWER PCB"] --> B["COMPRESSOR"]
    A --> C["NTC1"]
    A --> D["NTC2"]
    A --> E["LED"]
    A --> F["FAN"]
    A --> G["FAN"]
    H["PL"] --> I["BY"]
    J["BY/GN"] --> K["Ground"]
    L["PL"] --> M["BY/GN"]
    N["BY/GN"] --> O["Ground"]
    P["PL"] --> Q["BY/GN"]
    R["BY/GN"] --> S["Ground"]
    T["PL"] --> U["BY/GN"]
    V["BY/GN"] --> W["Ground"]
    X["BY/GN"] --> Y["Ground"]
    Z["BY/GN"] --> AA["Ground"]
    AB["BY/GN"] --> AC["Ground"]
    AD["BY/GN"] --> AE["Ground"]
    AF["BY/GN"] --> AG["Ground"]
    AH["BY/GN"] --> AI["Ground"]
    AJ["BY/GN"] --> AK["Ground"]
    AL["BY/GN"] --> AM["Ground"]
    AN["BY/GN"] --> AO["Ground"]
    AP["BY/GN"] --> AQ["Ground"]
    AR["BY/GN"] --> AS["Ground"]
    AT["BY/GN"] --> AU["Ground"]
    AV["BY/GN"] --> AW["Ground"]

INSTALACIÓN