PAH 1700 C3 - Drill PARKSIDE - Free user manual and instructions
Find the device manual for free PAH 1700 C3 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Hammer Drill |
| Model | PAH 1700 C3 |
| Brand | Parkside |
| Power | 1700 W |
| Voltage | 230 V ~ 50 Hz |
| No-Load Speed | 0 - 2800 rpm (variable) |
| Impact Rate | 0 - 48000 bpm |
| Max Drilling Diameter in Steel | 13 mm |
| Max Drilling Diameter in Concrete | 20 mm |
| Max Drilling Diameter in Wood | 40 mm |
| Chuck Type | Keyless |
| Chuck Capacity | 1.5 - 13 mm |
| Weight | 2.5 kg |
| Dimensions (L x W x H) | 300 x 200 x 80 mm |
| Cable Length | 3 m |
| Protection Class | II (double insulated) |
| Safety Features | Overload protection, soft start, lock-on button |
| Maintenance | Regular carbon brush inspection, clean ventilation slots |
| Spare Parts Availability | Carbon brushes, chuck, switch |
| Included Accessories | Depth stop, auxiliary handle, carrying case |
Frequently Asked Questions - PAH 1700 C3 PARKSIDE
How to change the drill bit?
To change the bit, first unplug the drill. Then rotate the chuck counterclockwise to open. Insert the bit and tighten by rotating clockwise. Ensure the bit is securely locked.
What is the maximum drilling capacity?
The PAH 1700 C3 can drill up to 40 mm in wood, 20 mm in concrete, and 13 mm in steel. Use appropriate bits and settings.
How to use the hammer function?
Slide the mode selector to the hammer position (marked with a hammer icon) for drilling into masonry or concrete. For standard drilling, select the drill position. Never use hammer function on metal or wood.
How to clean and maintain the drill?
Regularly clean ventilation slots with a brush to prevent overheating. Wipe the housing with a damp cloth. Periodically check and replace carbon brushes when worn. Keep the chuck clean and lubricated.
What safety precautions should I take?
Always wear safety goggles and ear protection. Use the auxiliary handle for control. Ensure the workpiece is clamped. Keep the cord away from the drill bit. Unplug before adjustments.
Why does the drill stop suddenly?
Possible causes: overload protection triggered, carbon brushes worn out, or power supply issues. Let the drill cool down for 10 minutes. If persistent, inspect brushes or contact a service center.
How to replace carbon brushes?
Unplug the drill. Remove the brush caps on the motor housing using a screwdriver. Slide out the old brushes and insert new ones (same size). Replace caps. Run the drill for a few minutes to seat brushes.
Can I use the drill for screwdriving?
Yes, with a screwdriving bit. Use the variable speed trigger at low speed. Set the torque clutch (if available) to avoid over-tightening. For best results, use a depth stop.
What does the variable speed trigger do?
The trigger controls the drill speed from 0 to maximum. Press gently for low speed, fully for high speed. This allows precise control for different materials and applications.
How to store the drill properly?
Store in a dry, clean place away from moisture. Use the carrying case if available. Remove any bits and clean the drill. Keep out of reach of children. Avoid extreme temperatures.
User questions about PAH 1700 C3 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual PAH 1700 C3 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAH 1700 C3 by PARKSIDE.
USER MANUAL PAH 1700 C3 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PAH 1700 C3
Category : Drill