V10 - Receiver Hegel - Free user manual and instructions
Find the device manual for free V10 Hegel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Hegel |
| Model | V10 |
| Power Output | 2 x 100W (8 ohms, 20 Hz - 20 kHz, THD < 0.01%) |
| Frequency Response | 5 Hz - 100 kHz |
| Total Harmonic Distortion | < 0.01% |
| Inputs | 4x RCA, 1x XLR, 1x Phono (MM), 1x Coaxial, 2x Optical, 1x USB |
| Outputs | 2x Speaker, 1x Pre-out, 1x Headphone (6.35mm) |
| Bluetooth | Yes, aptX HD |
| Streaming | DLNA, AirPlay 2, Spotify Connect, Tidal Connect |
| Dimensions (W x H x D) | 430 x 100 x 380 mm |
| Weight | 12 kg |
| Power Consumption (Standby) | < 0.5 W |
| Power Consumption (Max) | 500 W |
| Power Supply | 230V AC, 50/60 Hz |
| Remote Control | Included (RC10) |
| User Interface | Front panel buttons and rotary knob, OLED display |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety | Disconnect power before cleaning. Do not expose to moisture. |
| Spare Parts / Repairability | Contact authorized service center. Designed for 10+ year lifespan. |
Frequently Asked Questions - V10 Hegel
How do I connect my turntable to the Hegel V10?
Use the Phono (MM) input on the back. If your turntable has a moving coil cartridge, you will need an external phono preamp.
Can I use the Hegel V10 with a subwoofer?
Yes, connect your subwoofer to the Pre-out output. You can adjust the subwoofer level via the receiver's menu.
How do I perform a factory reset?
With the unit off, press and hold the Menu button on the front panel while turning the power on. Continue holding until 'Reset' appears on the display.
Does the V10 support Bluetooth?
Yes, it supports Bluetooth with aptX HD for high-quality wireless streaming. Pair your device by selecting 'Hegel V10' in your Bluetooth settings.
What streaming services are compatible?
The V10 supports Spotify Connect, Tidal Connect, AirPlay 2, and DLNA for local network streaming.
How do I update the firmware?
Download the latest firmware from the Hegel website onto a USB drive. Insert the USB into the receiver and navigate to Settings > Firmware Update in the menu.
The display is showing 'Protect' mode. What should I do?
This indicates a short circuit or overload. Turn off the unit, disconnect all speaker wires and inputs, then restart. If the issue persists, contact service.
Can I bi-amp my speakers with the V10?
No, the V10 is a single amplifier. For bi-amping, you would need a second amplifier or a model with bi-amp outputs.
What is the recommended speaker impedance?
The V10 is designed for speakers with an impedance of 4-16 ohms. For best performance, use 8 ohm speakers.
How do I clean the front panel?
Use a dry, soft cloth to gently wipe the surface. Do not use any liquids, sprays, or abrasive cleaners.
User questions about V10 Hegel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual V10 - Hegel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V10 by Hegel.
USER MANUAL V10 Hegel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hegel
Model : V10
Category : Receiver