H190 - Receiver Hegel - Free user manual and instructions
Find the device manual for free H190 Hegel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Integrated Amplifier / Receiver |
| Brand | Hegel |
| Model | H190 |
| Power Output | 2 x 150 W into 8 Ω, 2 x 250 W into 4 Ω |
| Frequency Response | 5 Hz – 100 kHz |
| Total Harmonic Distortion | < 0.01 % |
| Signal-to-Noise Ratio | > 100 dB |
| Damping Factor | > 1000 |
| Analog Inputs | 2 x RCA, 1 x XLR (balanced) |
| Digital Inputs | 1 x Coaxial, 2 x Optical, 1 x USB |
| Headphone Output | 6.35 mm jack (front) |
| Speaker Outputs | 2 pairs (bi-wire compatible) |
| DAC Capabilities | Up to 32-bit / 384 kHz PCM, DSD64/128/256 |
| Dimensions (W x H x D) | 430 x 110 x 380 mm |
| Weight | 20 kg |
| Power Consumption | Typical 80 W, Standby < 0.5 W |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids or solvents. |
| Safety Instructions | Do not open the unit. Refer servicing to qualified personnel. |
| Spare Parts / Repairability | Contact Hegel dealer or authorized service center for genuine parts. |
| General Information | Dual-mono design, Class A/B output stage, SoundEngine 2 technology. |
Frequently Asked Questions - H190 Hegel
How do I connect my TV to the Hegel H190?
Use the optical or coaxial digital input from your TV's audio output. Select the corresponding input on the H190 via the remote or front panel.
Can I use the H190 as a preamp only?
Yes, the H190 has preamp outputs. Connect them to an external power amplifier while the H190's internal amplifier can be turned off.
What is the maximum resolution supported via USB?
The USB input supports PCM up to 32-bit/384 kHz and DSD up to DSD256 (native).
How do I bi-wire my speakers?
Use both sets of speaker terminals. Connect the high-frequency binding posts to one set and low-frequency to the other, removing the jumper plates on the speakers.
Does the H190 have a phono input?
No, the H190 does not have a built-in phono stage. You will need an external phono preamp for turntables.
How do I update the firmware?
Firmware updates are done via USB. Visit Hegel's website for the latest firmware file and follow the instructions in the manual.
What is the headphone output impedance?
The headphone output has a low output impedance suitable for most headphones (typically below 1 ohm).
Can I control the H190 with a universal remote?
Yes, the H190 has an IR input and can learn commands from other remotes via the setup menu.
How do I reset the H190 to factory settings?
Press and hold the 'Input' button on the front panel for 5 seconds until 'RESET' appears on the display.
What is the warranty period?
Hegel offers a 2-year warranty from the date of purchase. Register your product online to extend it to 5 years.
User questions about H190 Hegel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual H190 - Hegel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H190 by Hegel.
USER MANUAL H190 Hegel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hegel
Model : H190
Category : Receiver