H95 - Receiver Hegel - Free user manual and instructions
Find the device manual for free H95 Hegel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Integrated Amplifier with DAC |
| Brand | Hegel |
| Model | H95 |
| Dimensions (W x H x D) | 43 x 10.5 x 36 cm (16.9 x 4.1 x 14.2 in) |
| Weight | 12.5 kg (27.6 lbs) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Output Power | 2 × 60 W (8 Ohms), 2 × 100 W (4 Ohms) |
| Frequency Response | 5 Hz - 100 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Inputs | 2 x RCA, 1 x XLR balanced, 1 x Coaxial, 1 x Optical, 1 x USB-B, 1 x Ethernet, 1 x USB-A (for storage) |
| Outputs | 1 x Pre-out, 1 x Subwoofer out, 1 x Headphone (6.3mm) |
| Supported Audio Formats | MP3, AAC, WMA, OGG, WAV, FLAC, ALAC, AIFF, DSD (up to DSD128) |
| Streaming Features | AirPlay 2, UPnP, Spotify Connect, Tidal Connect, Roon Ready |
| Maintenance | Wipe with a soft, dry cloth. Do not use solvents or abrasives. |
| Safety | Do not expose to water or excessive heat. Ensure proper ventilation. |
| Spare Parts and Repairability | Contact authorized service center. Product designed for longevity. |
| General Information | High-end integrated amplifier with built-in DAC and network streaming. |
Frequently Asked Questions - H95 Hegel
How do I connect my Hegel H95 to my speakers?
Use high-quality speaker cables with banana plugs or bare wire. Connect to the speaker terminals on the rear panel, ensuring correct polarity (+/-). Minimum impedance 4 ohms.
Can I use the H95 as a preamplifier only?
Yes, the H95 has a pre-out output that can be connected to a separate power amplifier. You can also use the fixed line output for a subwoofer.
How do I stream music via AirPlay?
Ensure the H95 is connected to your home network via Ethernet or Wi-Fi (if adapter used). On your Apple device, select the H95 from the AirPlay output menu. The source should be set to Network.
What is the maximum resolution for USB audio?
The USB-B input supports PCM up to 32-bit/384 kHz and DSD up to DSD128 (DoP). For best performance, use a high-quality USB cable.
Why is there no sound from my H95?
Check that the amplifier is turned on and not in standby. Verify the selected input source matches the connected device. Ensure speaker cables are properly connected and not shorted. Check the volume level.
How do I update the firmware?
Go to the Hegel website, download the latest firmware to a USB drive. Insert the USB drive into the H95, then navigate to Settings > Firmware Update. Do not power off during update.
Can I control the H95 with a mobile app?
Yes, the H95 supports third-party apps such as Roon, Tidal Connect, or UPnP controllers. There is no dedicated Hegel app, but you can use generic UPnP apps like BubbleUPnP.
What is the recommended burn-in time?
Hegel amplifiers benefit from a burn-in period of about 100-200 hours to reach optimal performance. Play your music at moderate levels during this time.
How do I reset the H95 to factory settings?
Turn off the unit. Press and hold the 'Menu' button on the front panel while turning the power back on. Release when 'Factory Reset' appears. Confirm with volume knob.
Is the H95 compatible with a turntable?
The H95 does not have a built-in phono preamp. You will need an external phono preamplifier for MM or MC cartridges. Connect the phono preamp output to any line-level input on the H95.
User questions about H95 Hegel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual H95 - Hegel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H95 by Hegel.