RT-500 - Alimentation sans coupure Sven - Free user manual and instructions
Find the device manual for free RT-500 Sven in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Model | RT-500 |
| Brand | Sven |
| Dimensions (W x D x H) | 280 x 140 x 85 mm |
| Weight | 4.5 kg |
| Input Voltage | 220-240 V ~ 50 Hz |
| Output Voltage | 220-240 V ~ 50 Hz (battery mode) |
| Power Capacity | 500 VA / 300 W |
| UPS Topology | Line-interactive with AVR |
| Battery Type | Sealed lead-acid, rechargeable |
| Typical Backup Time (full load) | 10-15 minutes |
| Number of Output Sockets | 4 (with surge protection) |
| Communication Port | USB (for monitoring) |
| Surge Protection | Yes, built-in |
| Overload Protection | Yes |
| Short Circuit Protection | Yes |
| Cold Start Function | Yes (start without AC input) |
| Certifications | CE, RoHS |
| Maintenance | Clean with dry cloth; check battery monthly |
| Repairability | User-replaceable battery; other parts by Sven service |
Frequently Asked Questions - RT-500 Sven
What does the Sven RT-500 UPS protect against?
The Sven RT-500 protects against power outages, voltage sags, surges, and brownouts. It provides automatic voltage regulation (AVR) and battery backup to keep your equipment running smoothly.
How long does the battery last on the RT-500?
At full load (300W), the battery typically lasts 10-15 minutes. For lighter loads, runtime increases. The battery is user-replaceable; lifespan is about 3-5 years depending on usage.
Can I replace the battery myself?
Yes, the RT-500 has a user-replaceable battery. Refer to the manual for instructions on how to safely replace it with a compatible SLA battery.
Does the RT-500 have USB monitoring?
Yes, it features a USB port for connection to a computer. You can install Sven monitoring software to perform safe shutdowns and view power status.
What is the maximum power output of the RT-500?
The maximum output is 500 VA (300 Watts). Do not exceed this load to avoid overload and shutdown.
How do I test the UPS battery?
Press and hold the test button (if available) to simulate a power failure. The UPS should switch to battery mode. Alternatively, unplug the UPS from the wall briefly while a small load is connected.
The UPS beeps continuously – what does that mean?
Continuous beeping usually indicates battery low or overload. Check if the load is too high or the battery needs replacement. Refer to the manual for beep patterns.
Can I connect a laser printer to the RT-500?
It is not recommended because laser printers draw high peak power that may exceed the UPS capacity. Use the UPS only for sensitive electronics like computers and network equipment.
How should I clean and maintain the UPS?
Unplug the UPS and clean the exterior with a dry, soft cloth. Avoid liquids. Periodically check the battery terminals for corrosion and ensure vents are not blocked.
What does the AVR function do?
AVR (Automatic Voltage Regulation) stabilizes the output voltage when input voltage fluctuates. It corrects undervoltage and overvoltage without draining the battery, prolonging battery life.
User questions about RT-500 Sven
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alimentation sans coupure in PDF format for free! Find your manual RT-500 - Sven and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RT-500 by Sven.