ASP880 - Receiver Audient - Free user manual and instructions
Find the device manual for free ASP880 Audient in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-channel microphone preamplifier |
| Brand | Audient |
| Model | ASP880 |
| Dimensions (W x H x D) | 482.6 mm x 44.5 mm x 240 mm (19" x 1.75" x 9.45") |
| Weight | Approximately 3.5 kg (7.7 lbs) |
| Power Supply | Internal mains PSU, 100-240 VAC, 50/60 Hz |
| Number of Channels | 8 |
| Preamp Type | Class-A, transformer-coupled |
| Input Connectors | 8 x XLR combo jacks (mic/line) |
| Output Connectors | 8 x balanced XLR line outputs, 1 x ADAT optical output, 1 x word clock BNC |
| Maximum Input Level | +24 dBu |
| Gain Range | 0 dB to +60 dB (per channel) |
| Phantom Power | Switchable +48V per channel pair |
| Pad | -20 dB per channel |
| High-Pass Filter | 80 Hz, 12 dB/octave per channel |
| Polarity Reverse | Per channel |
| Sample Rate | 44.1 kHz to 96 kHz (ADAT output) |
| Frequency Response | 10 Hz - 40 kHz (±0.5 dB) |
| THD+N | < 0.0002% at 1 kHz, +20 dBu output |
| Noise (EIN) | < -129 dBu (22 Hz - 22 kHz, unweighted) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Safety Certifications | CE, FCC, UL, RoHS |
| Accessories Included | IEC power cable, rack ears, user manual |
| Maintenance | Keep dry and clean; avoid dust; wipe with a soft, dry cloth |
| Repair / Spare Parts | Contact Audient support or authorized service centers |
Frequently Asked Questions - ASP880 Audient
How do I connect the ASP880 to my audio interface?
Use the ADAT optical output on the ASP880 to connect to an ADAT input on your interface. Ensure both devices are set to the same sample rate and clock source (set ASP880 as slave or use word clock).
Can I use the ASP880 without an ADAT connection?
Yes, you can use the analog line outputs (balanced XLR) to connect directly to any analog input of your mixer or interface. The ADAT output is for digital connection.
How do I enable phantom power on a channel?
Phantom power is switched in pairs (channels 1-2, 3-4, 5-6, 7-8). Press the +48V button for the respective pair. The LED will illuminate when active.
What is the purpose of the -20 dB pad?
The pad reduces the input level by 20 dB to accommodate high-level sources (e.g., loud instruments or line level signals) without clipping. Press the pad button per channel to activate.
How do I use the high-pass filter?
Press the HPF button on the desired channel to activate the 80 Hz, 12 dB/octave filter. This reduces low-frequency rumble (e.g., from HVAC or stage noise).
What should I do if a channel is not producing sound?
Check the following: 1) Ensure the phantom power is on if using a condenser mic. 2) Verify the pad is not engaged if signal is too low. 3) Confirm the gain knob is turned up. 4) Test with a known working cable and source.
How do I set up the ASP880 as a standalone preamp?
Connect microphones to the XLR inputs, use the analog XLR line outputs to feed your monitor or recorder. Power on the unit, adjust gain per channel, and engage phantom power as needed. No ADAT connection required.
Can I rack-mount the ASP880?
Yes, the unit comes with rack ears that allow mounting in a standard 19-inch rack. It occupies 1U of rack space.
What is the maximum input level of the ASP880?
The maximum input level is +24 dBu (with pad engaged, it can handle higher levels). Without pad, the clipping point is lower, so use the pad for hot signals.
How do I clean and maintain the ASP880?
Disconnect power, then wipe the exterior with a soft, dry cloth. Do not use liquids or abrasive cleaners. Avoid dust accumulation on the top vents. For interior cleaning, seek professional service.
User questions about ASP880 Audient
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual ASP880 - Audient and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASP880 by Audient.
USER MANUAL ASP880 Audient
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audient
Model : ASP880
Category : Receiver