ASP800 - Uncategorized Audient - Free user manual and instructions
Find the device manual for free ASP800 Audient in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-channel microphone preamplifier with ADAT output |
| Channels | 8 |
| Inputs | 8 XLR/TRS combo jacks (mic/line), 1 ADAT input |
| Outputs | 1 ADAT output (lightpipe), 8 balanced line outputs on DB25 |
| Phantom Power | +48V per channel, switchable in pairs |
| Frequency Response | 10 Hz to 40 kHz |
| Dynamic Range | 116 dB (typical) |
| THD+N | <0.002% |
| Power Supply | External 12V DC power adapter (included) |
| Dimensions (W x D x H) | 482 x 200 x 44 mm (19" rackmount, 1U) |
| Weight | 2.5 kg |
| Construction | Steel chassis, rack ears included |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Use only supplied power supply; do not expose to rain |
| Spare Parts | Contact Audient for power supply or parts |
| Warranty | 3 years (conditions apply) |
| Compatibility | Works with any ADAT-equipped interface |
| Preamplifier Type | Class A discrete |
| Pad | -20 dB per channel |
| High-Pass Filter | 80 Hz, 12 dB/octave per channel |
Frequently Asked Questions - ASP800 Audient
How do I connect the ASP800 to my audio interface?
Use a standard lightpipe (ADAT) cable from the ASP800's ADAT output to your interface's ADAT input. Ensure your interface is set to receive external clock if needed.
Does the ASP800 require a clock source?
Yes, the ASP800 must receive word clock via ADAT or BNC (if equipped). Typically it receives clock from the interface via the ADAT connection.
How do I enable phantom power?
Phantom power (+48V) is switched in pairs on the front panel. Press the corresponding switch for channels 1-2, 3-4, 5-6, or 7-8.
Can I use the ASP800 with analog mixers?
Yes, it has balanced line outputs on a DB25 connector. You can connect to a mixer's line inputs (requires a DB25 to XLR or TRS snake).
What sample rates does the ASP800 support?
It supports sample rates up to 96 kHz. At 96 kHz, only 4 channels are available due to ADAT bandwidth (SMUX protocol).
How do I engage the high-pass filter?
Each channel has a switch labeled 'HPF' or '80Hz'. Engage it to roll off frequencies below 80 Hz.
Is the ASP800 compatible with Windows and Mac?
Yes, as it is a hardware unit that does not require drivers. It works with any device that has an ADAT input.
What is the power consumption?
The ASP800 draws about 12W at 12V DC. Use only the provided power supply to avoid damage.
Can I rackmount the ASP800?
Yes, it occupies 1U of rack space and includes mounting ears. Ensure proper ventilation.
How do I clean and maintain the ASP800?
Disconnect power, then wipe the exterior with a soft, dry cloth. Do not use solvents or cleaners. Keep vents clear of dust.
User questions about ASP800 Audient
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ASP800 - Audient and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASP800 by Audient.
USER MANUAL ASP800 Audient
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audient
Model : ASP800
Category : Uncategorized