EVO SP8 - Uncategorized Audient - Free user manual and instructions
Find the device manual for free EVO SP8 Audient in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-Channel Microphone Preamp with ADAT Output |
| Brand | Audient |
| Model | EVO SP8 |
| Form Factor | 1U Rackmount |
| Number of Channels | 8 |
| Preamp Type | Class-A Audient Console Mic Preamps |
| Analog Inputs | 8 x XLR (Balanced) |
| Analog Outputs | 2 x 1/4" TRS (Monitor Outputs) |
| Digital Output | 1 x ADAT (Toslink) – 8 channels at 48 kHz |
| Headphone Output | 1 x 1/4" TRS with dedicated volume control |
| Phantom Power | +48V per channel (switchable) |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Dynamic Range | >120 dB (A-weighted) |
| THD+N | <0.001% at 1 kHz, -1 dBFS |
| Power Supply | External 12V DC power adapter (included) |
| Dimensions (W x D x H) | 482 x 254 x 44 mm (19" x 10" x 1.75") |
| Weight | Approx. 2.7 kg (6 lbs) |
| Construction | Steel chassis with aluminum front panel |
| Compatibility | Any device with ADAT input; works with EVO software for control |
| Included Accessories | Power adapter, rack ears, USB cable (for control) |
| Cleaning | Use dry soft cloth; avoid solvents |
| Safety | Do not expose to moisture; use only provided power supply |
| Repairability | No user-serviceable parts; contact Audient support |
Frequently Asked Questions - EVO SP8 Audient
How do I connect the EVO SP8 to my audio interface?
Use an optical ADAT cable to connect the ADAT output of the EVO SP8 to the ADAT input of your audio interface. Ensure both devices are set to the same sample rate (up to 48 kHz).
Can I use the EVO SP8 as a standalone preamp without a computer?
Yes, the EVO SP8 can operate standalone. Connect your microphones, set phantom power as needed, and use the ADAT output to send audio to any device with an ADAT input. No computer required for basic operation.
How do I enable +48V phantom power on a channel?
Phantom power is controlled via the EVO software (USB connection) or the front panel button. Press the channel button to toggle phantom power; the LED will indicate when it is active.
What is the maximum sample rate supported by the ADAT output?
The EVO SP8 supports sample rates up to 48 kHz on all 8 channels via ADAT. To use higher sample rates (e.g., 96 kHz), you would need to use S/MUX protocol, but this device does not support that; it is limited to 48 kHz.
Does the EVO SP8 require a driver to function on Windows or Mac?
For control via the EVO software, you need to install the EVO driver (available on Audient's website) on Windows. On macOS, it is class-compliant for audio but the software still requires installation for control features.
Can I use the EVO SP8 with a microphone that needs more than 48V?
No, the EVO SP8 provides only +48V phantom power. For microphones requiring higher voltage (e.g., some tube mics), you would need an external power supply.
How do I reduce noise or hiss from the preamps?
Ensure gain is set appropriately; the EVO SP8 preamps are very low noise. Check that cables are balanced and properly shielded. Avoid excessive gain; use the -20 dB pad if input is too hot (available via EVO software).
Can I daisy-chain multiple EVO SP8 units together?
No, the EVO SP8 does not have a dedicated ADAT input for chaining. You would need a device with multiple ADAT inputs to connect several units independently.
What is the warranty period for the EVO SP8?
The EVO SP8 is covered by a standard 2-year warranty from Audient. For full details, check the included warranty card or visit the Audient website.
How do I update the firmware on the EVO SP8?
Connect the EVO SP8 to your computer via USB, open the EVO software, and navigate to the settings menu. If a firmware update is available, a prompt will appear. Follow the on-screen instructions to complete the update.
User questions about EVO SP8 Audient
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EVO SP8 - Audient and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVO SP8 by Audient.
USER MANUAL EVO SP8 Audient
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audient
Model : EVO SP8
Category : Uncategorized