LED IP T-PIX 12 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED IP T-PIX 12 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Pixel Tube |
| Model | LED IP T-PIX 12 |
| Brand | Eurolite |
| LED Type | 12 x SMD 5050 RGB LEDs |
| Pixel Count | 12 individually controllable pixels |
| IP Rating | IP65 |
| Beam Angle | 120° |
| Power Consumption | 36 W |
| Input Voltage | AC 100-240 V, 50/60 Hz |
| DMX Control | Yes, 3/4/8 channel modes |
| DMX Channels | 36 (3 per pixel) or 48 (4 per pixel) |
| Protocols | DMX512, Art-Net (optional) |
| Operating Temperature | -20°C to 45°C |
| Housing Material | Aluminum |
| Dimensions (L x W x H) | 1000 x 50 x 50 mm |
| Weight | 1.5 kg |
| Mounting | Floor stand, truss clamp (optional) |
| Cooling | Passive convection |
| Protection | Overheat, overvoltage |
| Maintenance | Clean with soft, dry cloth. Avoid solvents. |
| Safety | Disconnect power before maintenance. Use only supplied cable. |
| Spare Parts | LEDs not user-replaceable; contact service center. |
| Repairability | Professional repair only; do not open. |
Frequently Asked Questions - LED IP T-PIX 12 Eurolite
How do I control the LED IP T-PIX 12 via DMX?
Connect the fixture to a DMX controller using a 3-pin XLR cable. Set the DMX address using the display and buttons on the rear panel. Refer to the manual for channel mapping.
Is the fixture suitable for outdoor use?
Yes, it has an IP65 rating, meaning it is dust-tight and protected against water jets. Ensure all connectors are properly sealed.
Can I daisy chain multiple units?
Yes, you can link up to 32 units using DMX cables. The power input allows series connection; check total power draw.
What is the power consumption per fixture?
The maximum power consumption is 36 W at full output. Use a power supply with sufficient capacity for multiple units.
How do I mount the T-PIX 12?
The fixture can be placed on a flat surface or mounted using optional brackets. Ensure secure attachment to avoid falling.
Can I use it with sound activation?
Yes, it has a built-in microphone for sound-controlled modes. Adjust sensitivity via the control panel.
What LED type does it use?
It uses 12 high-power SMD 5050 RGB LEDs, one per pixel, capable of producing a wide color range.
How to reset the fixture to factory defaults?
Go to the menu, select 'Default', and confirm. Alternatively, press and hold the Mode button for 5 seconds.
Is the fixture compatible with Art-Net?
Some models support Art-Net via an optional interface. Check your unit's specifications.
What should I do if a pixel fails?
Individual LEDs are not user-replaceable. Contact Eurolite service for repair or replacement.
User questions about LED IP T-PIX 12 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED IP T-PIX 12 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED IP T-PIX 12 by Eurolite.
USER MANUAL LED IP T-PIX 12 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED IP T-PIX 12
Category : Lighting