Eurolite

Audience Blinder 2x100W LED COB CW/WW - Lighting Eurolite - Free user manual and instructions

Find the device manual for free Audience Blinder 2x100W LED COB CW/WW Eurolite in PDF.

📄 20 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Eurolite Audience Blinder 2x100W LED COB CW/WW - page 12
12 / 20
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Blinder
Brand Eurolite
Model Audience Blinder 2x100W LED COB CW/WW
Light Source 2 x 100W LED COB (Cool White & Warm White)
Color Temperature CW: 5600K, WW: 3200K
Beam Angle 45°
Dimmer 0-100% linear dimming
Control DMX512, Master/Slave, Standalone
DMX Channels 2 or 4 (selectable)
Power Consumption 250W
Input Voltage AC 100-240V, 50/60Hz
Housing Metal, black
Cooling Passive convection
Mounting Floor stand or truss clamp
Dimensions (approx.) 550 x 250 x 350 mm
Weight (approx.) 8.5 kg
Accessories Included Power cord, DMX cable, user manual
Maintenance Clean lens with soft cloth, ensure ventilation slots free of dust
Safety Class Class I, IP20 indoor use only
Repairability Replaceable LED modules and power supply unit

Frequently Asked Questions - Audience Blinder 2x100W LED COB CW/WW Eurolite

How do I reset the fixture to factory defaults?
Press and hold the 'Menu' button for 5 seconds until the display shows 'Reset'. Then select 'Yes' and confirm.
How do I set the DMX address?
Press 'Menu' to enter setup, navigate to 'DMX Address', use the up/down buttons to set the desired address, and press 'Enter' to save.
Can I use this blinder without a DMX controller?
Yes, it has standalone and master/slave modes. Set one unit as Master and others as Slave, and they will sync.
What is the maximum ambient temperature for operation?
The maximum ambient temperature is 40°C (104°F). Do not operate in higher temperatures to avoid overheating.
How do I clean the lens?
Use a soft, dry cloth. If necessary, lightly dampen with water. Do not use alcohol or solvents as they may damage the lens.
What is the IP rating?
IP20 for indoor use only. Do not expose to rain or moisture.
Can I mount the fixture on a truss?
Yes, it has mounting brackets for truss clamps. Ensure the clamp is rated for the weight (8.5 kg) and secure properly.
How do I replace a faulty LED module?
Disconnect power, open the rear panel, unscrew the LED module, disconnect wires, and replace with a new module. Reassemble in reverse order.
What power cable do I need?
A standard IEC C13 power cord. The fixture accepts 100-240V AC, so it works worldwide with the appropriate plug.
How many DMX channels does it use?
It can be set to 2 or 4 channels. In 2-channel mode, channel 1 controls intensity and channel 2 selects color. In 4-channel mode, each LED head has independent intensity and color.

User questions about Audience Blinder 2x100W LED COB CW/WW Eurolite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual Audience Blinder 2x100W LED COB CW/WW - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Audience Blinder 2x100W LED COB CW/WW by Eurolite.

USER MANUAL Audience Blinder 2x100W LED COB CW/WW Eurolite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eurolite

Model : Audience Blinder 2x100W LED COB CW/WW

Category : Lighting