DR6050 - Uncategorized MARANTZ - Free user manual and instructions
Find the device manual for free DR6050 MARANTZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Double Cassette Deck |
| Brand | Marantz |
| Model | DR6050 |
| Color | Black / Silver |
| Dimensions (W x H x D) | 430 x 120 x 300 mm |
| Weight | 5.5 kg |
| Power Supply | AC 230V, 50Hz |
| Power Consumption | 25 W |
| Frequency Response | 30 Hz - 18 kHz (Metal tape) |
| Signal-to-Noise Ratio | 60 dB (Dolby B) |
| Wow and Flutter | 0.08% WRMS |
| Input Sensitivity (Line) | 100 mV |
| Output Level (Line) | 0.5 V |
| Headphone Jack | 6.3 mm stereo |
| Auto Reverse | Yes (both decks) |
| Dolby Noise Reduction | B and C |
| Tape Type Supported | Type I (Normal), Type II (CrO2), Type IV (Metal) |
| Number of Heads | 2 per deck (record/playback + erase) |
| Motor Type | DC servo |
| Remote Control | IR remote (optional) |
| Standby Power | Less than 1 W |
| Accessories Included | RCA cables, manual |
| Maintenance | Clean heads and pinch rollers monthly with isopropyl alcohol |
| Safety | Do not expose to moisture; disconnect power when cleaning |
Frequently Asked Questions - DR6050 MARANTZ
How do I clean the tape heads on my Marantz DR6050?
Use a cotton swab moistened with isopropyl alcohol (90% or higher). Gently rub the record/playback heads, erase heads, and pinch rollers. Let dry before use.
What should I do if the tape does not play?
Check that the tape is properly inserted and the deck is in play mode. Ensure the auto reverse is not stuck. If still not playing, inspect the belts for wear.
How do I connect the DR6050 to my amplifier?
Use RCA cables to connect the Line Out jacks on the deck to an available Line In or Tape In on your amplifier.
Can I use metal tapes with this deck?
Yes, the DR6050 supports Type IV (Metal) tapes. Set the tape selector to 'Metal' for optimal bias and EQ.
How do I enable Dolby noise reduction?
Press the Dolby NR button to cycle through B, C, and off. The display will indicate the selected mode. Use the same setting on playback as recording.
What does the auto reverse feature do?
Auto reverse automatically changes the tape direction when the end is reached, allowing continuous playback of both sides without flipping the tape manually.
How do I set a timer recording?
Connect an external timer to the AC outlet. Set the timer to power on at the desired time, press Record and Pause on the deck. When power is applied, recording begins.
My deck won't power on. What should I check?
First, ensure the power cord is plugged in and the outlet works. Check the fuse on the back panel; replace if blown. If still no power, consult a technician.
What kind of maintenance does the DR6050 require?
Regular cleaning of the heads and pinch rollers is essential. Also, demagnetize the tape path every 30 hours of use to prevent high-frequency loss.
Where can I find replacement belts for my Marantz DR6050?
Replacement belts can be purchased from electronics parts suppliers or online marketplaces. Look for a belt kit specifically for the DR6050 or compatible models.
User questions about DR6050 MARANTZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DR6050 - MARANTZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DR6050 by MARANTZ.
