MWR-WG00KN - Remote control SAMSUNG - Free user manual and instructions
Find the device manual for free MWR-WG00KN SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Control |
| Brand | Samsung |
| Model | MWR-WG00KN |
| Dimensions (approx.) | 165 x 55 x 25 mm |
| Weight (approx.) | 100 g |
| Power Source | 2 x AAA batteries (not included) |
| Display Type | LCD with backlight |
| Communication | Infrared (IR) |
| Compatible Systems | Select Samsung air conditioners |
| Basic Functions | On/Off, Mode (Cool/Heat/Dry/Fan), Temperature, Fan Speed |
| Additional Functions | Timer, Sleep, Swing, Turbo, Quiet, Clean |
| Temperature Range Setting | 16°C – 30°C (approx.) |
| Timer Range (Off/On) | 0.5 – 24 hours |
| Operating Range (IR) | Up to 7 meters (direct line-of-sight) |
| Battery Life (approx.) | 6 months with normal use |
| Material | ABS plastic |
| Cleaning Instructions | Wipe with a soft, dry cloth |
| Safety Precautions | Avoid water, heat, and dropping |
| Spare Parts Availability | Batteries only (standard AAA) |
| Repairability | Not user-serviceable; contact service center |
| Warranty Period | 1 year (depending on region) |
| Included in Box | Remote control, user manual (download online) |
Frequently Asked Questions - MWR-WG00KN SAMSUNG
How do I pair the remote control with my air conditioner?
The MWR-WG00KN remote is pre-programmed for compatible Samsung air conditioners. Point the remote at the air conditioner and press Power. No pairing is needed.
What batteries does the remote control use?
It uses two AAA alkaline batteries (not included). Insert them with correct polarity as shown inside the battery compartment.
Why is the remote control not working?
Check if batteries are inserted correctly or depleted. Replace with fresh batteries. Ensure nothing blocks the infrared sensor on the remote or air conditioner. Try pointing directly at the unit within 7 meters.
How do I reset the remote control?
Remove batteries, press any button for 5 seconds to discharge residual power, then reinsert batteries. This resets the microcontroller.
Can the remote control operate all Samsung air conditioners?
No, it is designed for select Samsung systems. Check compatibility list in the manual or at Samsung's website.
How do I set the timer on this remote?
Press Timer button repeatedly to switch between On timer, Off timer, or cancel. Use +/– to adjust time in 0.5-hour steps up to 24 hours.
What does the 'Swing' button do?
Press Swing to start/stop vertical louver oscillation. Press and hold for horizontal swing (if supported by the air conditioner).
Is the display always on?
The LCD display shows current settings when any button is pressed. It goes dim after a few seconds to save battery.
How do I clean the remote control?
Wipe the surface with a soft, dry cloth. Do not use water or cleaning fluids. Avoid exposure to sunlight or heat.
What should I do if a button gets stuck?
Remove batteries and gently clean around the stuck button with a dry cloth. If still stuck, contact Samsung support; the remote may need replacement as it is not user-serviceable.
User questions about MWR-WG00KN SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual MWR-WG00KN - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MWR-WG00KN by SAMSUNG.