S15A - Subwoofer Proel - Free user manual and instructions
Find the device manual for free S15A Proel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Subwoofer |
| Brand | Proel |
| Model | S15A |
| Dimensions (W x H x D) | 520 x 600 x 550 mm |
| Weight | 30 kg |
| Power Output (RMS) | 600 W |
| Power Output (Peak) | 1200 W |
| Amplifier Type | Class D |
| Frequency Response (-3 dB) | 35 - 150 Hz |
| Maximum SPL | 127 dB |
| Driver | 15" Neodymium |
| Input Connectors | XLR (female) |
| Output Connectors | XLR (male) |
| Controls | Volume, Low Pass Filter, Phase Switch, Ground Lift |
| Filter Type | Variable LPF 80-120 Hz |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 800 W max |
| Enclosure Material | Plywood with black coating |
| Cooling | Convection, fan assisted |
| Protection Features | Thermal, Overload, Limiter |
| Operating Temperature | 0°C to 40°C |
| Safety Instructions | Disconnect power before cleaning. Do not expose to rain or moisture. |
| Maintenance | Wipe with a dry cloth. Keep vents clean. |
| Spare Parts Availability | Contact Proel support for authorized service centers. |
Frequently Asked Questions - S15A Proel
How do I connect the S15A subwoofer to my PA system?
Use a balanced XLR cable from your mixer or crossover output to the INPUT XLR connector on the subwoofer. For daisy-chaining to another sub, use the OUTPUT XLR jack. Ensure the phase switch matches the orientation of your other speakers.
What is the recommended crossover frequency for the S15A?
Set the low pass filter (LPF) between 80 and 120 Hz depending on your main speakers. Start at 100 Hz and adjust for seamless integration. The variable LPF control allows precise setting.
Why is there no sound coming from my S15A?
Check power supply and ensure the power switch is on. Verify signal cable connection and that the source is active. Look at the front LED: green indicates normal operation, red indicates protection mode (overload/overheat). If red, let it cool down.
Can I use the S15A outdoors?
Yes, but it is not weatherproof. Protect it from rain and direct sunlight. Use a cover when not in use. Ensure proper ventilation to avoid overheating.
Does the S15A have a built-in crossover?
Yes, it includes a variable low‑pass filter (80–120 Hz) and a phase switch (0/180°) to optimize integration with full‑range speakers.
What are the dimensions and weight of the S15A?
Dimensions are approximately 520 x 600 x 550 mm (W x H x D) and weight is about 30 kg. Always use two people to lift and position the subwoofer.
How do I clean and maintain my S15A subwoofer?
Disconnect power. Wipe the enclosure with a dry, lint‑free cloth. Do not use solvents or harsh cleaners. Keep ventilation grilles free of dust. Periodically check cable connections.
What is the power consumption of the S15A?
Maximum power consumption is about 800 W under full load. In standby or idle, consumption is significantly lower. Use a power outlet rated for at least 10 A.
Is the S15A compatible with 100V line systems?
No, it is designed for low‑impedance (8 ohm) operation with an internal amplifier. It requires a standard AC power outlet (100–240 V). It cannot be used directly on a 100V line.
What should I do if the amplifier goes into protection mode?
Protection mode (red LED) indicates overload, overheating, or short circuit. Reduce volume, improve ventilation, and ensure impedance is not too low. Let the unit cool for 10 minutes before restarting. If persistent, contact Proel service.
User questions about S15A Proel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual S15A - Proel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S15A by Proel.