EP-220PR - Mixer Omnitronic - Free user manual and instructions
Find the device manual for free EP-220PR Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | DJ Mixer / Audio Mixer |
| Brand | Omnitronic |
| Model | EP-220PR |
| Inputs | 2 x Phono (RCA), 2 x Line (RCA), 2 x Microphone (XLR/Jack combo) |
| Outputs | 2 x Master (RCA), 1 x Booth (Jack), 1 x Headphone (Jack), 1 x Record (RCA) |
| Channels | 2 |
| Equalizer | 3-band EQ per channel (High, Mid, Low) |
| Crossfader | Yes, assignable to channels |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.05% |
| Signal-to-Noise Ratio (SNR) | > 90 dB |
| Phantom Power | +48 V (switchable) |
| Headphone Output | Yes, with separate volume control and cue selection |
| Power Supply | 100-240 V AC, 50/60 Hz (external adapter) |
| Dimensions (W x D x H) | 480 x 300 x 100 mm |
| Weight | 5 kg |
| Rack Mountable | Yes, 19" rack ears included |
| Cooling | Passive (no fan) |
| Accessories Included | Power adapter, User manual |
| Safety Features | Grounding terminal, overload protection |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Spare Parts Availability | Potentiometers, faders, knobs available via service |
Frequently Asked Questions - EP-220PR Omnitronic
How do I connect the Omnitronic EP-220PR to my turntables?
Connect your turntables to the Phono inputs on the mixer using RCA cables. Ensure the turntables have a ground wire connected to the GND terminal to avoid hum.
Why is there no sound from the speakers?
Check that the Master volume is turned up and the speakers are powered. Also verify that the channel faders and gain controls are set correctly. If using a microphone, ensure the Mic channel is unmuted.
Can I use the EP-220PR with a computer?
Yes, you can connect a computer to the Line inputs using a 3.5mm to RCA adapter. For recording, use the Record output.
How do I enable phantom power for condenser microphones?
Press the +48V switch located on the back panel. This applies phantom power to both microphone inputs simultaneously.
What does the 'Assign' button on the crossfader do?
The Assign button selects which channel (1 or 2) is controlled by the crossfader. Pressing it toggles the assignment; the corresponding LED indicates the active channel.
How do I clean the mixer?
Use a soft, dry cloth to wipe the surface. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol or abrasive cleaners. Avoid getting liquid into the faders or knobs.
The output is distorted. What should I check?
Reduce the Gain controls on each channel to avoid clipping. Also check that the Master volume is not too high. If distortion persists, inspect cables for damage or try different sources.
Can I rack-mount the EP-220PR?
Yes, it is 19-inch rack-mountable. Use the supplied rack ears and attach them to the sides of the mixer. Allow sufficient ventilation around the unit.
How do I cue a track in the headphones?
Press the Cue button on the desired channel. Adjust the headphone volume using the Phones knob. The cue mix can be controlled via the Headphone Cue blend control.
What is the warranty period for the mixer?
Omnitronic offers a 2-year warranty on the EP-220PR. Keep your original receipt as proof of purchase. Warranty covers manufacturing defects but not damage from misuse.
User questions about EP-220PR Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual EP-220PR - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EP-220PR by Omnitronic.