EM-260B - Mixer Omnitronic - Free user manual and instructions
Find the device manual for free EM-260B Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DJ Mixer |
| Brand | Omnitronic |
| Model | EM-260B |
| Channels | 2 |
| Inputs | 2x Line (RCA), 1x Microphone (1/4" jack), 1x Aux (RCA) |
| Outputs | 1x Master (RCA), 1x Headphone (1/4" jack) |
| Equalizer | 2-band per channel (Bass, Treble) |
| Crossfader | Yes, adjustable curve |
| Headphone Output | 1/4" stereo jack, volume control |
| Power Supply | DC 12V, 300mA (adapter included) |
| Dimensions (W x D x H) | 200 x 180 x 70 mm |
| Weight | 1.2 kg |
| Material | Metal chassis, plastic faceplate |
| Color | Black |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 85 dB |
| Total Harmonic Distortion | < 0.05% |
| Input Sensitivity (Line) | 200 mV |
| Input Sensitivity (Mic) | 10 mV |
| Output Level (Master) | 1 V |
| Headphone Impedance | 32 Ω recommended |
| Operating Temperature | 0°C - 40°C |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Use only supplied adapter; keep away from water |
| Spare Parts / Repairability | No user-serviceable parts; contact authorized service |
Frequently Asked Questions - EM-260B Omnitronic
How do I connect my turntables to the EM-260B?
Use RCA cables to connect your turntables to the Line 1 and Line 2 inputs. Ensure turntables have a built-in phono preamp or connect via an external preamp.
Can I use a microphone with the mixer?
Yes, the EM-260B has a dedicated Mic input (1/4" jack). Plug in your microphone and adjust the Mic level knob.
How do I connect headphones?
Use the Headphone output (1/4" stereo jack) on the front panel. Adjust the volume with the Headphone knob.
What power supply does the EM-260B need?
It requires a DC 12V adapter with at least 300mA current. Use only the supplied adapter to avoid damage.
How do I adjust the crossfader curve?
The Crossfader curve can be adjusted via a small trim pot on the bottom panel. Turn it clockwise for a sharper cut, counterclockwise for a smoother fade.
Why is there no sound from the master output?
Check that the Master volume is turned up and speakers are connected. Also ensure input channels are not muted and their Gain knobs are set properly.
Can I connect a USB device to this mixer?
No, the EM-260B does not have a USB port. It is an analog mixer with only RCA and 1/4" jack connections.
How do I clean the mixer?
Disconnect power and use a soft dry cloth to wipe the surface. Do not use water or cleaners, as they may damage the electronics.
What should I do if a knob becomes loose?
Loose knobs can be gently pushed back on. If the shaft is damaged, contact Omnitronic support for replacement.
Is the mixer compatible with 220V outlets?
The included power adapter is typically a switching type that accepts 100-240V AC, 50/60Hz. Check the adapter label for voltage range.
User questions about EM-260B Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual EM-260B - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EM-260B by Omnitronic.
USER MANUAL EM-260B Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : EM-260B
Category : Mixer