STEINEL Multisensor True Presence BT IPD - Motion detector

Multisensor True Presence BT IPD - Motion detector STEINEL - Free user manual and instructions

Find the device manual for free Multisensor True Presence BT IPD STEINEL in PDF.

📄 64 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice STEINEL Multisensor True Presence BT IPD - page 34
34 / 64
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeMotion detector with Bluetooth
BrandSteinel
ModelMultisensor True Presence BT IPD
Detection TechnologyInfrared presence sensor (True Presence)
Detection Angle360°
Detection RangeUp to 8 m (diameter)
BluetoothYes, BLE for configuration via app
Power Supply230 V AC, 50/60 Hz
Power Consumption< 0.5 W (standby), 1.5 W (active)
Setting Range (Lux)10–2000 lux
Time Setting10 s – 60 min
Mounting Height2 – 4 m
Dimensions (H × D)88 × 100 mm
Weight150 g
Protection ClassIP44
Ambient Temperature-20°C to +40°C
CleaningWipe with a dry cloth; do not use solvents
SafetyInstall by a qualified electrician; disconnect power before maintenance
Spare Parts / RepairabilitySpare parts available via Steinel; repair by authorized service only
ComplianceEU directives (CE)

Frequently Asked Questions - Multisensor True Presence BT IPD STEINEL

How do I pair the sensor with the Steinel app?
Download the Steinel Smart Remote app from your app store. Ensure Bluetooth is enabled on your smartphone. The sensor automatically advertises; tap on it in the app and follow the pairing instructions.
What is the maximum mounting height?
The recommended mounting height is between 2 to 4 meters for optimal detection performance.
Can I use this sensor outdoors?
The sensor has an IP44 rating, which makes it splash-proof, but it is not designed for direct exposure to rain or moisture. It is best suited for sheltered outdoor areas or indoors.
How do I adjust the sensitivity?
Sensitivity can be adjusted via the Steinel Smart Remote app. Sliders for detection sensitivity and ambient light threshold are available.
What does 'True Presence' mean?
True Presence technology detects fine movements like breathing or typing, not just large motions. It is suitable for presence-based lighting or HVAC control.
Why does the sensor not detect me?
Check that the sensor is not covered, the mounting height is correct, and the sensitivity setting is high enough. Also ensure the ambient light level is below the set lux threshold.
Can I connect multiple sensors?
Yes, multiple True Presence sensors can be used in a network. They communicate via Bluetooth mesh in the Steinel app.
How do I reset the sensor to factory settings?
Press and hold the reset button inside the sensor for at least 5 seconds until the LED flashes. All settings will be cleared.
Is the sensor compatible with existing wiring?
The sensor requires a 230 V AC supply and replaces a standard wall switch or ceiling rose. Consult your electrician for proper installation.
How do I clean the sensor?
Use a soft, dry cloth to wipe the housing. Do not use abrasive cleaners or solvents as they may damage the surface.

User questions about Multisensor True Presence BT IPD STEINEL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Motion detector in PDF format for free! Find your manual Multisensor True Presence BT IPD - STEINEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Multisensor True Presence BT IPD by STEINEL.

USER MANUAL Multisensor True Presence BT IPD STEINEL

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : STEINEL

Model : Multisensor True Presence BT IPD

Category : Motion detector