BTCLS918 - Uncategorized JUNG - Free user manual and instructions
Find the device manual for free BTCLS918 JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Smart Home Controller / Actuator |
| Brand | JUNG |
| Model | BTCLS918 |
| Dimensions | Approx. 85 x 85 x 40 mm (mounting depth 30 mm) |
| Weight | Approx. 150 g |
| Power Supply | 230 V AC, 50/60 Hz |
| Power Consumption | < 0.5 W standby |
| Connectivity | Wi-Fi 2.4 GHz, IEEE 802.11 b/g/n |
| Supported Protocols | JUNG HOME IP, MQTT (optional) |
| Maximum Load | 10 A (resistive), 2 A (inductive) |
| Functions | Switching, dimming (if applicable), scene control, timer |
| Control Interface | Push button (local) and app-based remote control |
| Mobile App | JUNG HOME app (iOS/Android) |
| Voice Control | Amazon Alexa, Google Assistant compatible |
| Operating Temperature | -5 °C to +45 °C |
| Protection Class | IP20 (indoor use) |
| Housing Material | Thermoplastic, white (similar to RAL 9010) |
| Mounting | Flush mounting (standard 60 mm junction box) |
| Repairability | Modular design; replaceable relay unit |
| Certifications | CE, RoHS, WEEE |
Frequently Asked Questions - BTCLS918 JUNG
How do I install the JUNG BTCLS918?
Turn off power at the circuit breaker. Connect the device according to the wiring diagram in the manual. The BTCLS918 is designed for flush mounting in a standard 60 mm junction box. After installation, restore power and configure via the JUNG HOME app.
What are the dimensions of the BTCLS918?
The device measures approximately 85 x 85 x 40 mm with a mounting depth of about 30 mm. It fits standard switch frames.
Is the BTCLS918 compatible with Amazon Alexa or Google Home?
Yes, it supports voice control via Amazon Alexa and Google Assistant. You need to enable the JUNG HOME skill in the respective voice app.
What is the maximum load the BTCLS918 can handle?
The maximum load is 10 A for resistive loads (e.g., incandescent bulbs) and 2 A for inductive loads (e.g., motors). Do not exceed these limits.
Can I use the BTCLS918 without an internet connection?
Yes, the device can be operated manually via the push button. However, remote control and automation features require a Wi-Fi connection and the JUNG HOME app.
How do I reset the BTCLS918 to factory settings?
Press and hold the push button for 10 seconds until the LED flashes rapidly. Release the button; the device resets and restarts. Reconfigure via the app.
Does the BTCLS918 support dimming?
The BTCLS918 is primarily a switching actuator. For dimming functions, refer to the specific model variant (e.g., BTCLS918D). Check your device label.
What should I do if the BTCLS918 is not connecting to Wi-Fi?
Ensure your router broadcasts on 2.4 GHz. Move the device closer to the router during setup. Restart the device and try again. Reset if necessary.
Is the BTCLS918 suitable for outdoor use?
No, the device has an IP20 rating, making it suitable for indoor use only. Avoid exposure to moisture or dust.
Where can I find the user manual for the BTCLS918?
The manual is available as a PDF download on the notice-facile.com product page. You can also find it on the official JUNG website. It covers installation, operation, and troubleshooting.
User questions about BTCLS918 JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BTCLS918 - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTCLS918 by JUNG.