Maxxum 800Si - Camera KONICA MINOLTA - Free user manual and instructions
Find the device manual for free Maxxum 800Si KONICA MINOLTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 35mm SLR Film Camera |
| Brand | Konica Minolta |
| Model | Maxxum 800Si |
| Dimensions (approx.) | 150 x 100 x 70 mm |
| Weight (approx.) | 600 g (without lens and batteries) |
| Power Source | 2 x CR123A Lithium Batteries |
| Lens Mount | Minolta A-mount |
| Autofocus System | TTL phase detection, 9-area |
| Exposure Modes | Aperture Priority, Shutter Priority, Manual, Program AE |
| Shutter Speed Range | 30 sec - 1/8000 sec, Bulb |
| Built-in Flash | Guide number 12 (ISO 100), Auto, Red-eye reduction |
| Film ISO Range | DX coded 25-5000, manual 6-6400 |
| Drive Modes | Single, Continuous (up to 3 fps), Self-timer |
| Maintenance | Clean exterior with soft dry cloth; keep lens cap on; store in cool dry place |
| Safety Precautions | Avoid extreme temperatures, moisture, and direct sunlight; remove batteries if not used for long periods |
| Spare Parts / Repairability | Batteries, lens caps, neck strap; professional repair recommended for internal issues |
| General Information | Released in 1995; compatible with Minolta A-mount lenses and accessories |
Frequently Asked Questions - Maxxum 800Si KONICA MINOLTA
How do I load film into the Maxxum 800Si?
Open the film chamber by sliding the back cover release. Insert the film cartridge into the left side, pull the film leader across to the take-up spool, and close the back. The camera will advance automatically.
What type of batteries does the Maxxum 800Si use?
It requires two CR123A lithium batteries. Ensure proper polarity when inserting.
How can I set the ISO manually?
If the film is not DX coded, press the ISO button and rotate the control dial to set the desired ISO value (range 6-6400).
What is the maximum flash sync speed?
The flash sync speed is 1/250 sec. Using a faster shutter speed may result in partial flash coverage.
How do I use the self-timer?
Press the self-timer button on the front. The timer will delay the shutter release by about 10 seconds. The LED blinks and speeds up before firing.
Can I use non-AF lenses?
Yes, but only in manual focus mode. Use the focus ring and confirm focus through the viewfinder.
My camera won't turn on. What should I check?
Ensure the power switch is ON. Check battery insertion and polarity. If batteries are low, replace them. Also check the battery contacts for corrosion.
How do I clean the camera?
Use a soft, dry cloth to wipe the body. For the lens, use a blower brush and lens cleaning paper. Never use solvents or wet cloths.
What does the 'P' mode do?
Program AE mode automatically selects both aperture and shutter speed for optimal exposure. You can shift the program by rotating the control dial.
Where can I find replacement batteries?
CR123A batteries are widely available at electronics stores, camera shops, and online retailers. Always choose reputable brands.
User questions about Maxxum 800Si KONICA MINOLTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual Maxxum 800Si - KONICA MINOLTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Maxxum 800Si by KONICA MINOLTA.