Dynax 505Si - Camera KONICA MINOLTA - Free user manual and instructions
Find the device manual for free Dynax 505Si KONICA MINOLTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 35mm Film SLR Camera (Autofocus) |
| Brand | Konica Minolta |
| Model | Dynax 505Si |
| Dimensions (W x H x D) | 148 x 96 x 67 mm |
| Weight (Body Only) | 535 g |
| Power Source | 2 x CR123A Lithium Batteries |
| Battery Life | Approximately 20 rolls of 36 exposures |
| Lens Mount | Minolta A-type (AF) |
| Shutter Speed Range | 1/2000 to 30 seconds (Bulb mode) |
| Film Advance | Automatic, motorized |
| Exposure Modes | Program, Aperture Priority, Shutter Priority, Manual, Full Auto |
| Metering System | 14-segment honeycomb pattern TTL |
| ISO Range | ISO 25 to 5000 (DX code auto or manual) |
| Flash Type | Built-in retractable flash, GN 12 (ISO 100, meters) |
| Self-Timer | 10-second delay |
| Maintenance & Cleaning | Use blower for sensor, soft cloth for body; avoid solvents |
| Safety Precautions | Avoid water, extreme heat, and strong magnetic fields |
| Spare Parts Available | Batteries, straps, lens caps, remote release (RC-500) |
| Repairability | Limited; serviceable by authorized Minolta centers |
Frequently Asked Questions - Dynax 505Si KONICA MINOLTA
What type of batteries does the Dynax 505Si use?
The camera uses two CR123A lithium batteries. These are commonly available and provide power for all functions including autofocus and film advance.
How do I load film into the camera?
Open the back cover by sliding the latch. Place the film cassette on the left side, pull the film leader across to the take-up spool, ensuring the sprockets engage. Close the back, and the camera will automatically advance to frame 1.
The shutter won't fire. What could be wrong?
First, check the batteries. If they are dead, replace them. Also ensure the film is properly loaded and the camera is set to an appropriate mode (e.g., not locked in 'BULB' without a remote). The lens must be fully attached.
How do I set the ISO manually?
The camera reads the film's DX code automatically. To override, press the ISO button and rotate the dial until the desired ISO (25-5000) is displayed. This is useful for push/pull processing.
What does the 'AE Lock' button do?
The AE Lock (Auto Exposure Lock) locks the exposure settings (aperture and shutter speed) based on the current metering. You can recompose the shot while holding the button, maintaining the same exposure.
Can I use a remote shutter release?
Yes, the Dynax 505Si is compatible with the Minolta RC-500 remote control (wired or wireless depending on version). It plugs into the remote terminal on the camera body.
The built-in flash doesn't pop up automatically. Why?
The flash must be manually released by pressing the flash lock button on the side. In full auto mode, it may pop up automatically in low light. Check that the flash is not turned off via the camera menu.
How do I replace the focusing screen?
The focusing screen is not user-replaceable on the Dynax 505Si. It is a fixed Type-5 screen. For cleaning, use a blower or brush gently.
What is the maximum shutter speed?
The maximum shutter speed is 1/2000 second. This is sufficient for most daylight conditions with fast film.
How do I clean the lens?
Use a soft brush or blower to remove dust. For fingerprints, gently wipe with a microfiber cloth. Apply lens cleaning solution to the cloth, not directly on the lens. Avoid scratching the coating.
User questions about Dynax 505Si KONICA MINOLTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual Dynax 505Si - KONICA MINOLTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dynax 505Si by KONICA MINOLTA.