R88A - Microphone AEA - Free user manual and instructions
Find the device manual for free R88A AEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Ribbon Microphone |
| Marque | AEA |
| Model | R88A |
| Polar Pattern | Figure-8 (bidirectional) |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | -54 dBV/Pa (1.9 mV/Pa) |
| Maximum SPL | 135 dB SPL (1% THD @ 1 kHz) |
| Output Impedance | 300 ohms |
| Load Impedance | ≥ 1 kohms |
| Connector | 2 × XLR (male), one per channel |
| Power Requirement | Passive (no phantom power) |
| Dimensions (L × W × H) | 10.5 × 1.25 × 1.25 inches (267 × 32 × 32 mm) |
| Weight | 3.5 lbs (1.6 kg) |
| Material | Ribbon: pure aluminum; Body: steel |
| Mounting | Two separate mic stands or shared stereo bar |
| Included Accessories | Stereo bar, mic clips, wooden case |
| Cleaning | Use a soft, dry brush to gently remove dust; avoid moisture |
| Maintenance | Store in a dry environment; handle with care to protect ribbon |
| Safety | Do not expose to high SPL close-up; avoid airflow (blasts, wind) |
| Spare Parts / Repairability | Ribbon replacement available; contact AEA service |
| Warranty | Limited 1-year warranty |
| Country of Origin | USA |
Frequently Asked Questions - R88A AEA
What is the AEA R88A microphone?
The AEA R88A is a premium stereo ribbon microphone designed for high-fidelity recording. It features two matched ribbon elements in a figure-8 polar pattern, ideal for capturing spacious soundstages.
Does the R88A require phantom power?
No, the R88A is a passive microphone and does not require phantom power. However, it works well with high-quality preamps that provide clean gain.
What is the best way to position the R88A for recording?
Use the stereo bar to mount the two microphones in either Blumlein or spaced pair configurations. The figure-8 pattern captures sound from front and back, making it excellent for room ambience.
Can I use the R88A for vocals?
Yes, it can be used for vocals, but due to its sensitivity and ribbon construction, avoid plosives (use a pop filter) and keep it at least 6 inches away.
How do I clean the R88A?
Gently remove dust using a soft, dry brush. Never use liquids or compressed air, as the ribbon is delicate. Store in its case when not in use.
What kind of preamp do I need for the R88A?
Since the R88A has a low output (-54 dBV/Pa), use a high-quality preamp with at least 60 dB of gain and low noise floor.
Is the R88A suitable for loud sound sources?
It can handle up to 135 dB SPL, making it suitable for guitar amps, drums, and brass, but keep it at a safe distance to avoid distortion or ribbon damage.
What is the warranty on the AEA R88A?
AEA provides a limited 1-year warranty covering defects in materials and workmanship. Ribbon replacement is covered separately.
Can I replace the ribbon myself?
Ribbon replacement should be done by AEA factory service to ensure proper tension and alignment. Contact AEA support for details.
How should I store the R88A?
Store it in the provided wooden case in a dry environment at room temperature. Avoid humidity and extreme temperatures.
User questions about R88A AEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual R88A - AEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R88A by AEA.
USER MANUAL R88A AEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEA
Model : R88A
Category : Microphone