ROG Xonar Phoebus Solo - Soundcard ASUS - Free user manual and instructions
Find the device manual for free ROG Xonar Phoebus Solo ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Internal Sound Card |
| Interface | PCI Express |
| Audio Channels | 7.1 Surround |
| Signal-to-Noise Ratio | 118 dB |
| Sample Rate | Up to 192 kHz / 24-bit |
| Frequency Response | 10 Hz - 48 kHz |
| Headphone Amplifier | Built-in, up to 600Ω |
| Inputs | 1x 3.5mm Line-in, 1x 3.5mm Mic-in |
| Outputs | 3x 3.5mm (Front, Rear, Center/Bass), 1x S/PDIF Optical |
| Dimensions (W x H) | 17.8 cm x 12.7 cm |
| Weight | Approx. 200 g |
| Power Consumption | From PCIe slot |
| Compatibility | Windows 10, 8.1, 7 (32/64-bit) |
| Additional Features | ASIO 2.2 support, Dolby Digital Live, DTS Connect |
| Maintenance | Clean with a dry, soft cloth; avoid moisture |
| Safety | EC standard, RoHS compliant |
| Spare Parts/Repairability | Not user-serviceable; contact ASUS support |
Frequently Asked Questions - ROG Xonar Phoebus Solo ASUS
How do I install the ASUS ROG Xonar Phoebus Solo?
Install the card into a free PCIe slot on your motherboard. Then download the latest drivers from ASUS support website and run the installer. Restart your PC and configure audio settings via the Sonic Studio software.
Does this sound card support 5.1 or 7.1 audio?
Yes, it supports 7.1 surround sound. You can connect up to 8 speakers using the 3.5mm jacks or S/PDIF output.
Can I use this sound card with Linux?
The card is designed for Windows. Linux support is limited and may require community drivers (e.g., Linux kernel's snd-virtuoso driver). Performance is not guaranteed.
What is the headphone output impedance?
The built-in headphone amplifier can drive headphones up to 600Ω. The output impedance is low (<2Ω) to ensure compatibility with a wide range of headphones.
How do I enable Dolby Digital Live?
Open the Xonar Audio Center software, go to 'Effect' or 'Encoder' tab, and enable 'Dolby Digital Live' to encode audio to Dolby Digital for S/PDIF output.
Why is there no sound from my speakers after installation?
Ensure the card is properly seated, drivers are installed, and the correct playback device is selected in Windows Sound settings. Also check that speakers are connected to the correct jacks.
Does the ROG Xonar Phoebus Solo have a microphone input?
Yes, it has a dedicated 3.5mm microphone input on the card's bracket. You can also use the front panel header via the internal connector.
Can I use this card for music production?
Yes, it supports ASIO 2.2 for low-latency recording and playback. The 118 dB SNR and 192kHz/24-bit sampling make it suitable for home studio work.
How do I clean the sound card?
Power off your PC and remove the card. Gently wipe the PCB and connectors with a dry, lint-free cloth. Avoid using liquids or compressed air near components.
What is the warranty period for this product?
The standard warranty is 2 years from date of purchase. Check with your retailer or ASUS support for details in your region.
User questions about ROG Xonar Phoebus Solo ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundcard in PDF format for free! Find your manual ROG Xonar Phoebus Solo - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ROG Xonar Phoebus Solo by ASUS.