Pixel Bar 8 COB - Lighting Showtec - Free user manual and instructions
Find the device manual for free Pixel Bar 8 COB Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Bar with 8 COB LEDs |
| Dimensions (L x W x H) | 1000 x 110 x 100 mm |
| Weight | 2.8 kg |
| Power Input | AC 100-240V, 50/60Hz |
| Power Consumption | 120 W max |
| Light Source | 8 x 10W RGBW COB LEDs |
| Beam Angle | 40° (linear) |
| Control Protocol | DMX512 |
| DMX Channels | 4 / 8 / 12 channel modes |
| Operating Modes | DMX, Master/Slave, Auto, Sound Active |
| Display | 4-digit LED display with buttons |
| Housing | Aluminum and steel, black finish |
| Cooling | Passive convection cooling |
| Mounting | Floor stand or truss via brackets |
| Safety Features | Overheat protection, safety cable attachment |
| IP Rating | IP20 (indoor use only) |
| Maintenance | Clean lens with soft dry cloth; no internal user-serviceable parts |
| Spare Parts & Repairability | LED modules and power supply available from Showtec dealers; repair by qualified technician |
| Included Accessories | Power cord, user manual, mounting brackets |
Frequently Asked Questions - Pixel Bar 8 COB Showtec
How to connect the Pixel Bar 8 COB to a DMX controller?
Use a 3-pin XLR cable to connect the DMX input of the fixture to the controller or previous fixture. Set the DMX address via the LED display. Ensure the terminator is used on the last fixture.
What is the maximum ambient temperature for operation?
The fixture should be operated in an ambient temperature between -10°C and 40°C. Avoid exposing it to direct sunlight or heat sources.
Can the Pixel Bar 8 COB be used outdoors?
No, it has an IP20 rating and is designed for indoor use only. Moisture or dust can damage the electronics.
How do I reset the fixture to factory settings?
Press the Menu button until 'FACT' appears, then press Enter. Confirm with 'YES'. The fixture will reset all settings to default.
What are the different DMX channel modes?
The fixture supports 4-channel (RGBW), 8-channel (RGBW + dimmer + strobe + macros), and 12-channel (individual control of each LED) modes. Select via Menu > CHND.
How to replace a faulty LED?
LED replacement should be done by a qualified technician. Contact your Showtec dealer for replacement modules. Do not attempt disassembly yourself.
Why is the fixture not responding to DMX?
Check the DMX cable connections, ensure the fixture is in DMX mode, and the address matches the controller. Also verify that the controller is sending data.
Can I link multiple Pixel Bar 8 COB units together?
Yes, you can chain up to 32 units using DMX cables. Set the first as Master and others as Slave in Master/Slave mode for synchronized operation.
How to clean the Pixel Bar 8 COB?
Disconnect power, wait for cooling. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner to wipe the lens and housing. Do not use abrasive cleaners.
What is the warranty period?
Showtec offers a standard 2-year warranty from the date of purchase against manufacturing defects. Warranty does not cover damage from misuse or unauthorized repairs.
User questions about Pixel Bar 8 COB Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Pixel Bar 8 COB - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pixel Bar 8 COB by Showtec.