Club Par 12-4 RGBW - Lighting Showtec - Free user manual and instructions
Find the device manual for free Club Par 12-4 RGBW Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Brand | Showtec |
| Model | Club Par 12-4 RGBW |
| Light Source | 12 x 4W RGBW LEDs (48W total) |
| Power Consumption | 60W (max) |
| Power Supply | AC 100-240V, 50/60Hz (IEC power connector) |
| DMX Channels | 4 / 6 / 8 channels (selectable) |
| Control Modes | DMX512, Auto, Sound Active, Master/Slave |
| Color Mixing | RGBW additive color mixing |
| Strobe Rate | 0-20 Hz (adjustable) |
| Dimmer | 0-100% linear dimming |
| Built-in Programs | Yes, multiple auto programs |
| Display | LED digital display with buttons |
| DMX Connectors | 3-pin XLR (in/out) |
| Power Connectors | IEC power in/out (daisy chain) |
| Dimensions (L x W x H) | 260 x 260 x 250 mm |
| Weight | 2.5 kg |
| Mounting | Floor standing or hanging (bracket included) |
| Cooling | Passive convection (no fan) |
| Protection Rating | IP20 (indoor use only) |
| Certifications | CE, RoHS |
| Included Accessories | Power cord, DMX cable, mounting bracket, user manual |
| Cleaning | Use a dry, soft cloth; avoid solvents |
Frequently Asked Questions - Club Par 12-4 RGBW Showtec
How do I set the DMX address on the Club Par 12-4 RGBW?
Press the Menu button to enter settings. Use Up and Down to select DMX Address. Press Enter then set the address using the buttons. Press Enter to confirm.
The fixture doesn't respond to sound control. What should I check?
Ensure the mode is set to Sound Active via the menu. Check that the built-in microphone is not blocked. The fixture requires sufficient ambient sound to activate.
How many DMX channels does this unit use?
The Club Par 12-4 RGBW can operate in 4-channel (RGBW), 6-channel (RGBW + dimmer + strobe), or 8-channel mode. Select via the DMX Mode menu.
Can I daisy-chain power to multiple fixtures?
Yes, you can connect power using the IEC power out connector. Maximum total current draw for connected fixtures should not exceed the circuit rating (typically 10A).
How do I reset the fixture to factory defaults?
Go to the menu and select Factory Reset or Default. Confirm by pressing Enter. The fixture will reset all settings.
The light output is flickering. Possible causes?
Check that the DMX cable is properly connected and not faulty. Ensure the terminator is on the last fixture. Also verify that the frequency setting (PWM) is not conflicting with camera frame rates.
What is the recommended cleaning method for the LED lens?
Disconnect power. Use a soft, dry cloth to gently wipe the lens. For stubborn dirt, slightly dampen the cloth with water. Never use alcohol or solvents.
Can I use this fixture outdoors?
No, this fixture has an IP20 rating, which means it is not weatherproof. Use only in indoor or dry locations.
How do I set up Master/Slave mode?
Connect fixtures via DMX cable. Set the first fixture to Master mode (e.g., Auto or Sound Active) and the others to Slave mode. The slaves will follow the master's program.
The fuse blew. How do I replace it?
Disconnect power. Locate the fuse holder near the power inlet. Use a small flat-head screwdriver to open it. Replace with the same type (5x20mm, 1A fast-blow or as marked on the device). Close the holder securely.
User questions about Club Par 12-4 RGBW Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Club Par 12-4 RGBW - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Club Par 12-4 RGBW by Showtec.
USER MANUAL Club Par 12-4 RGBW Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : Club Par 12-4 RGBW
Category : Lighting