SILVERCREST SSR 10 A1 - Mp3 player

SSR 10 A1 - Mp3 player SILVERCREST - Free user manual and instructions

Find the device manual for free SSR 10 A1 SILVERCREST in PDF.

📄 42 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SILVERCREST SSR 10 A1 - page 5
View the manual : Dansk DA English EN Slovenščina SL
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable MP3 Player
Brand SilverCrest
Model SSR 10 A1
Storage Capacity 4 GB
Display 1.5” OLED, 128x64 pixels
Audio Formats Supported MP3, WMA, WAV
FM Radio Yes, 87.5–108 MHz
Voice Recording Built-in microphone, WAV format
Battery Type Rechargeable lithium-ion, 3.7V, 180 mAh
Battery Life Up to 10 hours music playback
Charging USB 2.0 via mini-USB port
Connectivity USB 2.0 mini-USB, 3.5mm headphone jack
Dimensions (W x H x D) 40 x 30 x 12 mm
Weight 25 g
Operating System Compatibility Windows (7/8/10/11), macOS (10.7+)
Included Accessories Earphones, USB cable, quick start guide
Safety Precautions Do not expose to moisture or extreme temperatures. Keep away from children.
Cleaning Wipe with a soft, dry cloth. Do not use solvents.
Repairability / Spare Parts Battery only replaceable by qualified service. No user-serviceable parts.
General Information Operating temperature 0°C to 40°C. Storage temperature -20°C to 60°C.

Frequently Asked Questions - SSR 10 A1 SILVERCREST

How do I transfer music to the SilverCrest SSR 10 A1?
Connect the player to your computer via the included USB cable. The device will appear as a removable drive. Drag and drop your MP3, WMA, or WAV files into the music folder. Eject safely before disconnecting.
What is the battery life and how do I charge it?
The built-in lithium-ion battery provides up to 10 hours of music playback. Charge using the USB cable connected to a computer or a USB power adapter (5V, 500mA). A full charge takes about 2 hours.
How do I use the FM radio?
Press the Mode button to select Radio mode. Use the volume buttons to scan for stations (long press to auto-scan). Save up to 20 presets by holding the Play/Pause button. Navigate presets with short presses.
Can I record voice with this player?
Yes. Switch to Voice Recording mode using Mode button. Press Play/Pause to start/stop recording. Files are saved in WAV format in the ‘Recordings’ folder. Maximum recording length depends on free storage.
How do I reset the device?
If the device becomes unresponsive, press and hold the Power button for 10 seconds. If that fails, insert a pin into the Reset hole (if present) on the side of the player.
What file formats are supported?
The SSR 10 A1 supports MP3 (bitrate 8-320 kbps), WMA (bitrate 32-192 kbps), and WAV (PCM) audio files. It does not support AAC, FLAC, or DRM-protected files.
My earphones only produce sound from one side. What should I do?
Check if the earphone plug is fully inserted into the 3.5mm jack. Try a different pair of earphones to confirm if the issue is with the device or earphones. Also, check the earphones’ mesh for debris and clean gently.
How much storage is available for my music?
The device has 4 GB internal storage. Some space is reserved for the system and firmware, so approximately 3.7 GB is available for user files. This can hold roughly 1000 songs at 128 kbps.
Is it compatible with Windows 11 and macOS Ventura?
Yes. The player is recognized as a USB mass storage device, requiring no drivers. It works natively with Windows 7/8/10/11 and macOS 10.7 and newer.
Where can I find the user manual or get support?
The full user manual can be downloaded for free from notice-facile.com or the SilverCrest website. For technical support, contact SilverCrest customer service via their hotline or email, with the model number SSR 10 A1 ready.

User questions about SSR 10 A1 SILVERCREST

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Mp3 player in PDF format for free! Find your manual SSR 10 A1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSR 10 A1 by SILVERCREST.

USER MANUAL SSR 10 A1 SILVERCREST

natural_image Medical device with coiled tubing and earplugs, no visible text or symbols on the device itself.

FM Scan Radio

GB

FM Scan Radio

Operation and Safety Notes

DK

natural_image Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

SILVERCREST SSR 10 A1 - FM Scan Radio - 1

SILVERCREST SSR 10 A1 - FM Scan Radio - 2

GB Operation and Safety Notes Page 4

natural_image Two horizontal color swatches: black, gray, white with no text or symbols.

SILVERCREST SSR 10 A1 - FM Scan Radio - 3

A 16 1 2 3 4 5 6 14 10:00 13 7 8 9 101 112 15 OFF ON

SILVERCREST SSR 10 A1 - FM Scan Radio - 5

B + - - + ↓ II 1.5V DC 70kV/100 1.5V DC 70kV/100 17

SILVERCREST SSR 10 A1 - FM Scan Radio - 7

Proper Use Page 5

Parts list Page 5

Technical Data Page 6

Contents......Page 7

Safety notes

General Safety Instructions ......Page 7

Safety instructions for batteries......Page 9

Before Initial Use

Inserting the batteries......Page 10

Connecting headphones Page 10

Preparing for Use

Switching on....Page 11

Channel scan......Page 11

Adjusting the time......Page 12

Setting the alarm Page 12

Activating/Deactivating the alarm......Page 13

Replacing batteries ......Page 13

Cleaning and Care......Page 14

Disposal Page 15

FM Scan Radio

- Proper Use

This device is solely suited for receiving radio stations and for use in dry rooms. The device is not intended for commercial use.

- Parts list

1 PM symbol (indicates times after 12 noon)
2 FM symbol (indicates radio operation)
3 Alarm sign (indicates radio operation has been activated)
4 SET symbol (indicates the alarm settings mode)
5 TIME key (set time)
6 SCAN button (activates scanning for stations)
7 RESET button (restart station scan)
8 ALARM button (set alarm)
9 AL ON button (switch alarm on / off)
10 MIN button (set minutes)
11 HOUR button (set hours)
12 MHz sign (for indicating the radio frequency)
13 Numerical display of the time, alarm time or incoming frequency
14 Liquid crystal display

15 ON-/OFF turn switch and volume control
16 Headphones jack
17 Battery compartment cover

- Technical Data

Operating conditions: 5 °C - 35 °C at max.

85% humidity

Operating voltage: 3 V

Batteries: 2 batteries LRO3 (type

SILVERCREST SSR 10 A1 - - Technical Data - 1

AAA 1.5V---)

Audio output: 3.5 mm stereo jack

Maximum sound pressure

level on headphones: approx. 85 dB(A)

Incoming frequency range: approx. 87.5

MHz - 108.0 MHz

Attention: please note the legal provisions on free to air frequency ranges of radio signals may deviate from the reception of this FM scan radio. Any non-public information received due to this variance may not be commercialised.

- Contents

1 Scan radio with carrying loop
2 Batteries LRO3 (type AAA 1.5 V—)
1 Pair of headphones
1 Set of operating instructions

SILVERCREST SSR 10 A1 - - Contents - 1

Safety notes

PLEASE KEEP ALL SAFETY INSTRUCTIONS AND INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!

SILVERCREST SSR 10 A1 - Safety notes - 1

SILVERCREST SSR 10 A1 - Safety notes - 2

General Safety Instructions

Children or persons (including children) who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must be supervised to ensure they do not play with the product.

- Do not use the device if damaged.

■ Do expose the device to

  • strong vibrations,
  • strong mechanical stresses,

  • to direct sunlight,

  • humidity or moisture.

Otherwise there is a danger that the device will be damaged.

■ Protect the unit from moisture and humidity. Never immerse the device in water or other liquids!
- Do not use open flames (e.g. candle) or open containers with liquids (e.g. glassware) near the device. Fire or liquids could damage the device.
- Do not expose the device to extreme temperature fluctuations, as condensation may otherwise form inside the unit. Condensation may damage the unit.
- Using the unit in rooms or climates with high humidity and temperatures may cause condensation to form inside the device. Please refer to the information under chapter „Technical Data“.

Remember that excessive sound pressure or volumes from headphones or earphones can lead to damage to the hearing. Always adjust the volume to a pleasant, not too loud level. If you have adjusted the volume of the headphones to be too high and use that for an extended period, it can damage the listener's hearing.

SILVERCREST SSR 10 A1 - General Safety Instructions - 1

Safety instructions for batteries

WARNING! DANGER TO LIFE!

Batteries are not intended for children. If accidentally swallowed seek immediate medical attention.

SILVERCREST SSR 10 A1 - WARNING! DANGER TO LIFE! - 1

CAUTION! EXPLOSION HAZARD!

■ Never recharge non-rechargeable batteries and do not short-circuit and / or open any batteries.
■ Never throw batteries into fire or water!
- Do not exert mechanical loads to batteries!

RISK OF BATTERY LEAKAGE!

In the event of a battery leak, immediately remove it from the device to prevent damage! Avoid contact with the skin, eyes, and mucous membranes! In the event of contact with battery acid, thoroughly flush the affected area with clean water and seek immediate medical attention!

■ Only use the same type of batteries! Do not mix used and new batteries!
- Avoid extreme conditions and temperatures which may impact batteries, e.g. radiators!
■ Remove batteries from the device after extended periods of non-use! Risk of equipment damage.

■ Use only the recommended battery type!
■ When inserting the battery ensure the correct polarity! This is indicated in the battery compartment.
If necessary, clean the batteries and device contacts before inserting the batteries!
■ Promptly remove drained batteries from the product!

- Before Initial Use

- Inserting the batteries

☐ Open the battery cover 17 by sliding it in the direction of the arrow.
☐ Insert the included batteries. Ensure correct polarity. This is always indicated inside the battery compartment (Fig. B).

- Connecting headphones

Plug the stereo jack of the included headphones into the radio's headphones jack 16. Only use the included headphones. The headphones connection cable also serves as a radio aerial.

● Preparing for Use

- Switching on

☐ Turn the volume control 15 counter-clockwise to switch the radio on and to increase the signal volume.
☐ Turn the volume control clockwise to lower the signal volume. Turning it all the way counter-clockwise will switch the radio off.

- Channel scan

Note: Stations can only be scanned with the included headphones plugged into the headphones jack 16. The headphones cable also serves as a radio aerial. The radio does not have any additional internal speakers.

☐ Press the SCAN button 6. The radio will start scanning for stations and stop when the first station is found.
- Keep pressing the SCAN button until the radio has found a station of your liking. This search can be repeated until the end of the radio frequency is reached.
☐ To then scan from the start of the frequency range again, simply press the RESET button 7.

- Adjusting the time

Note: the clock will only be displayed with the radio switched off and can only be set with the radio off.

☐ Press and hold the TIME button 5 whilst adjusting the clock.
☐ Briefly press the HOUR button 11 to increase the hour display little by little. The clock features a 12 hour display. The PM sign 1 indicates the time past noon.
☐ Briefly press the MIN button 10 to increase the minute display little by little.

Note: neither the hour nor the minutes can be rewound. Once the highest value has been reached the numbers will restart.

Note: holding the HOUR or MIN button will continuously increase the display.

Once the desired time has been set, release the TIME button. The clock is now set.

- Setting the alarm

☐ Hold the ALARM button 8 whilst setting the time.
□ Briefly press the HOUR button 11 to increase the hour display little by little. The clock features a 12 hour display. The PM sign 1 indicates the time past noon.

☐ Briefly press the MIN button 10 to increase the minute display little by little.

Note: neither the hour nor the minutes can be rewound. Once the highest value has been reached the numbers will restart.

Note: holding the HOUR or MIN button will continuously increase the display.

Once the desired time has been set, release the ALARM button.

- Activating / Deactivating the alarm

SILVERCREST SSR 10 A1 - - Activating / Deactivating the alarm - 1

☐ Press the AL ON button 9 to switch the alarm on or off. The alarm symbol 3 will appear in the display when the alarm is activated. At the set time an audio signal will now sound for 3 minutes.

☐ Press the AL ON button to switch the audible signal off.

- Replacing batteries

The radio does not feature a visual low battery indicator. However, if the radio reception begins to fade the batteries need to be replaced. Follow these steps:

☐ Switch the radio off by turning the ON-/OFF turn switch 15 all the way counter-clockwise.

☐ Open the battery cover 17 by sliding it in the direction of the arrow.

☐ Remove the current batteries and insert new batteries. Ensure correct polarity. This is always indicated inside the battery compartment (Fig. B).

☐ Close the battery compartment. Your radio is now again ready for use.

Note: this device has electronic components. Therefore, interference may occur when it is near devices, which transmit radio signals. If error messages appear in the display, remove these devices from the proximity of the product. In the event of such malfunctions, remove the batteries briefly and reinsert them.

Note: Electrostatic discharge can lead to disruptions in the function. If you have such a functional disruption, remove the battery for a short time and then replace it again.

- Cleaning and Care

■ Never use liquids or cleaning agents as these will damage the device.
□ Clean the device with a soft, dry cloth.

- Disposal

SILVERCREST SSR 10 A1 - - Disposal - 1

The packaging is made of environmentally friendly materials, which may be disposed through your local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices.

SILVERCREST SSR 10 A1 - - Disposal - 2

When your device has come to the end of its life, please do not throw it out with your household refuse, but in the interest of the environment, take it to a suitable centre where it can be disposed of properly. Please contact your local authority for information on collection points and their opening hours.

SILVERCREST SSR 10 A1 - - Disposal - 3

Improper disposal of batteries can harm the environment!

Never dispose of batteries in your household waste. They may contain toxic heavy metals and are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead. Therefore, dispose of used batteries through your municipal collection site.

EMC CE

ADVARSEL! EKSPLOSIONSFARE!

natural_image Two horizontal grayscale color swatches: one black, gray, white with no text or symbols, the other yellow, magenta, cyan, blue, green, red, black, yellow, pink, and light blue.

SILVERCREST SSR 10 A1 - ADVARSEL! EKSPLOSIONSFARE! - 1

SILVERCREST SSR 10 A1 - ADVARSEL! EKSPLOSIONSFARE! - 2

SILVERCREST SSR 10 A1 - ADVARSEL! EKSPLOSIONSFARE! - 3

OWIM GmbH & Co. KG

Stiftsbergstraße 1

D-74167 Neckarsulm

Model-No.: Z31436

Version: 03 / 2013

© by ORFGEN Marketing

Last Information Update · Tilstand af

information · Stanje informacij: 02 / 2013

Ident.-No.: Z31436022013-DK/SI

IAN87316

DK SI

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SILVERCREST

Model : SSR 10 A1

Category : Mp3 player