HFO 3O32 CW X - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HFO 3O32 CW X HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Dimensions (H x W x D) | 850 x 600 x 590 mm |
| Weight | 45 kg |
| Capacity | 14 Place Settings |
| Energy Class | E |
| Noise Level | 47 dB(A) |
| Number of Programs | 8 |
| Water Consumption | 10 L per cycle (Eco) |
| Energy Consumption | 0.95 kWh per cycle (Eco) |
| Drying Efficiency | A |
| Maximum Temperature | 70 °C |
| Safety Features | Anti-leak system, Child lock |
| Filter System | Removable filter |
| Interior Material | Stainless steel |
| Adjustable Upper Basket | Yes |
| Salt and Rinse Aid Indicator | Yes |
| Delayed Start | Up to 24 hours |
| Drying Type | Condensation drying |
| Control Type | Electronic push buttons |
| Display | LED Display |
| Plug Type | Type F (Schuko) |
| Installation Requirements | Water inlet and drain hoses |
Frequently Asked Questions - HFO 3O32 CW X HOTPOINT
How do I start a wash cycle?
Load the dishwasher, add detergent, close the door, select a program using the program selection button, and press the start/pause button. The cycle will begin after the countdown.
What should I do if the dishes are not drying properly?
Ensure the rinse aid dispenser is filled and the setting is appropriate. Also, check that the drying option is enabled. Lastly, allow the dishes to cool before unloading for better drying results.
How often should I clean the filter?
Clean the filter every 3 months or when the filter cleaning indicator lights up. Remove the filter, rinse under running water, and brush off any debris. Reinstall it securely.
Why is the dishwasher making noise during operation?
Noise can be caused by dishes clashing, water circulation, or the drain pump. Ensure dishes are properly arranged and no large items obstruct the spray arms. If noise persists, check for foreign objects in the filter.
How do I reset the dishwasher?
Press and hold the start/pause button for about 3 seconds to cancel the current cycle. Then turn the program knob to the off position and back to the desired program. Close the door to start.
What does the error code 'E15' mean?
Error code E15 indicates a water leak detection. Turn off the dishwasher, check for leaks under the appliance, and dry any moisture. Restart the dishwasher. If the error persists, contact an authorized service center.
How do I install the dishwasher?
The dishwasher should be installed by a qualified technician. Ensure a proper water supply (cold water, 10-60°C), a drain hose connection, and an electrical outlet with grounding. Level the dishwasher and secure it under the countertop.
Why is the salt indicator still on after refilling?
After adding salt, run a rinse cycle to distribute it. The indicator may stay on for up to 2 cycles. Also, check that the salt setting matches your water hardness level.
Can I use regular dish soap?
No, use only dishwasher detergent (powder, gel, or tablets). Regular dish soap creates excessive suds that can damage the appliance and cause leaks.
How do I enable the child lock?
Press and hold the Child Lock button (usually marked with a key symbol) for 3 seconds until the indicator lights up. To disable, repeat the same procedure.
User questions about HFO 3O32 CW X HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HFO 3O32 CW X - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HFO 3O32 CW X by HOTPOINT.
USER MANUAL HFO 3O32 CW X HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HFO 3O32 CW X
Category : Dishwasher