HSFO 3T223 W X UK N - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HSFO 3T223 W X UK N HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | HSFO 3T223 W X UK N |
| Brand | Hotpoint |
| Standard Place Settings | 14 |
| Energy Class | E (Old EU label: A+) |
| Water Consumption per Cycle | 9.5 L |
| Annual Energy Consumption | 295 kWh |
| Noise Level | 49 dB(A) |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight | 50 kg |
| Power Supply Voltage | 220-240 V, 50 Hz |
| Power Consumption | 1900 W |
| Number of Programs | 8 |
| Programs | Eco 50°C, Intensive 65°C, Normal 60°C, Fast 30' 40°C, Pre-wash, Glass 40°C, Delicate 40°C, Auto 55-65°C |
| Half Load Option | Yes |
| Delayed Start | 1-24 hours |
| Adjustable Upper Basket | Yes, with foldable tines |
| Filter Type | Self-cleaning stainless steel filter |
| Rinse Aid Indicator | Yes |
| Salt Indicator | Yes |
| Child Lock | Yes |
| Available Colors | White (W) / Silver |
Frequently Asked Questions - HSFO 3T223 W X UK N HOTPOINT
How do I install the dishwasher?
Ensure the appliance is level and connected to water supply (cold fill only) and drainage. Electrical connection must be to a 10A fused spur. Refer to the installation guide for detailed steps.
Why won't my dishwasher start?
Check that the door is fully closed and latched, water supply is open, and the machine is plugged in. Also ensure a program has been selected. If the start button flashes, press it again.
What does error code F1 mean?
Error F1 indicates a water fill fault. Check the water tap is open, inlet hose is not kinked, and the water pressure is sufficient. Turn off and restart the cycle.
How often should I clean the filter?
Clean the filter assembly after every few cycles to remove food debris. Rinse under running water and ensure it is correctly refitted to avoid blockages.
Can I use regular dish soap?
No, only use specific dishwasher detergent (powder, gel, or tablets). Regular soap will create excessive foam and damage the machine.
How do I adjust the rinse aid dosage?
Open the rinse aid dispenser and adjust the dial from 1 (least) to 6 (most). Start with setting 3 and adjust if you see water spots.
Why are my dishes not drying?
Ensure the rinse aid is full, select a program with drying phase, and avoid overloading. For plastic items, open the door slightly after cycle for air drying.
What do the flashing lights on the panel mean?
Refer to the user manual: a flashing salt light indicates low salt, rinse aid light indicates low rinse aid, and program indicators flash to signal errors.
How do I reset the dishwasher?
Press and hold the Start button for 3 seconds to cancel the current cycle. To reset, turn off the power at the wall, wait 1 minute, then turn back on.
Is it normal for water to remain in the bottom after a cycle?
A small amount of water in the sump filter area is normal to keep seals moist. If water is excessive, check the filter and drain hose for blockages.
User questions about HSFO 3T223 W X UK N HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HSFO 3T223 W X UK N - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSFO 3T223 W X UK N by HOTPOINT.
USER MANUAL HSFO 3T223 W X UK N HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HSFO 3T223 W X UK N
Category : Dishwasher