FDS 2.350 - Receiver FOCAL - Free user manual and instructions
Find the device manual for free FDS 2.350 FOCAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Amplifier |
| Brand | Focal |
| Model | FDS 2.350 |
| Channels | 2 |
| Power Output (RMS per channel @ 4 ohms) | 175W |
| Power Output (RMS per channel @ 2 ohms) | 350W |
| Power Output (Bridged RMS @ 4 ohms) | 700W |
| Frequency Response | 10Hz – 30kHz |
| Signal-to-Noise Ratio | >105 dB |
| Total Harmonic Distortion | <0.01% |
| Input Sensitivity | 0.2V – 5V |
| Low Pass Filter | 50Hz – 500Hz |
| High Pass Filter | 50Hz – 500Hz |
| Bass Boost | 0 – 12dB at 45Hz |
| Dimensions (W x H x D) | 300 x 50 x 200 mm |
| Weight | 2.0 kg |
| Power Supply | 12V DC (10V – 15V) |
| Fuse Rating | 40A |
| Input Type | RCA & High-Level (Speaker Input) |
| Speaker Impedance | 2 – 8 ohms |
| Remote Turn-On | Yes (12V trigger) |
| Protection Circuitry | Thermal, Overload, Short Circuit |
| Recommended Use | Car Audio System |
| Maintenance | Clean with dry cloth; avoid moisture and dust |
| Safety | Disconnect battery before installation; use proper gauge wire |
Frequently Asked Questions - FDS 2.350 FOCAL
What is the power output of the Focal FDS 2.350 amplifier?
The Focal FDS 2.350 delivers 175W RMS per channel at 4 ohms, 350W RMS per channel at 2 ohms, and 700W RMS bridged at 4 ohms.
Can I bridge the FDS 2.350 amplifier?
Yes, the amplifier can be bridged to a single channel at 4 ohms, providing 700W RMS. Ensure the speaker impedance is at least 4 ohms when bridged.
What fuse rating is required for the FDS 2.350?
The amplifier requires a 40A fuse (not included). Use an appropriate in-line fuse holder near the battery.
What is the minimum speaker impedance for the FDS 2.350?
The minimum speaker impedance is 2 ohms per channel in stereo mode, and 4 ohms bridged.
Does the FDS 2.350 have a built-in crossover?
Yes, it features adjustable low-pass and high-pass filters (50Hz – 500Hz) as well as a bass boost (0-12dB at 45Hz).
What input voltage range is accepted by the FDS 2.350?
The input sensitivity ranges from 0.2V to 5V, compatible with most head units and preamplifiers.
What are the dimensions of the Focal FDS 2.350?
The amplifier measures approximately 300mm x 50mm x 200mm (WxHxD).
Can I use the FDS 2.350 with a factory stereo?
Yes, the amplifier includes high-level (speaker) inputs for connection to factory head units without RCA outputs.
Is the FDS 2.350 stable at 1 ohm?
No, the FDS 2.350 is not designed for 1-ohm loads. Minimum impedance is 2 ohms per channel in stereo, 4 ohms bridged.
How do I install the FDS 2.350 amplifier?
Disconnect the battery negative terminal. Mount the amplifier in a well-ventilated area. Connect power (B+), ground (GND), remote turn-on, signal inputs, and speaker outputs. Use appropriate wire gauge (4 AWG for power/ground recommended).
User questions about FDS 2.350 FOCAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual FDS 2.350 - FOCAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDS 2.350 by FOCAL.
USER MANUAL FDS 2.350 FOCAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FOCAL
Model : FDS 2.350
Category : Receiver