FDP 1.2000 - Receiver FOCAL - Free user manual and instructions
Find the device manual for free FDP 1.2000 FOCAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Monoblock Amplifier |
| Brand | Focal |
| Model | FDP 1.2000 |
| RMS Power Output | 1 x 2000W @ 1 ohm (RMS) |
| Dynamic Power Output | 1 x 4000W @ 1 ohm (peak) |
| Frequency Response | 10 Hz - 250 Hz |
| Low-Pass Filter | Variable 50 Hz - 250 Hz |
| Bass Boost | 0 - 12 dB @ 45 Hz |
| Phase Control | 0° / 180° |
| Input Sensitivity | 0.2 V - 8 V |
| Power Supply Voltage | 12 V DC (11-15 V) |
| Fuse Rating | 4 x 40A |
| Dimensions (W x H x D) | 11.8 x 2.4 x 9.1 in (300 x 62 x 230 mm) |
| Weight | 6.6 lbs (3.0 kg) |
| Recommended Speaker Impedance | 1 ohm (minimum) |
| Cooling | Convection (heatsink fins) |
| Remote Turn-On | 12 V trigger wire |
| Mounting | Hard surface, ventilation clearance |
| Compliance | CE, FCC |
| Warranty | 1 year (limited) |
Frequently Asked Questions - FDP 1.2000 FOCAL
What type of amplifier is the Focal FDP 1.2000?
The Focal FDP 1.2000 is a monoblock car audio amplifier designed to power a single subwoofer or multiple subwoofers wired to a 1 ohm load.
What is the RMS power output of this amplifier?
The FDP 1.2000 delivers 2000 watts RMS at 1 ohm, and can reach up to 4000 watts dynamic power.
What speaker impedance can I use with the FDP 1.2000?
This amplifier is stable down to 1 ohm. It can also handle 2 ohm or 4 ohm loads with lower power output.
Does the amplifier have a low-pass filter?
Yes, it features a variable low-pass filter adjustable from 50 Hz to 250 Hz, ideal for subwoofer applications.
What is the recommended power wire size?
For full power, use a 4 AWG power and ground wire. The amplifier includes 4x40A fuses, so ensure your wiring can handle up to 160A.
How do I adjust the gain on the FDP 1.2000?
The gain control adjusts input sensitivity from 0.2V to 8V. Set it as low as possible while achieving clean output from your head unit.
Can I use a bass remote knob with this amplifier?
The FDP 1.2000 does not include a remote bass knob, but you can use the built-in bass boost (0-12 dB @ 45 Hz) via the panel.
What are the dimensions of the FDP 1.2000?
The amplifier measures approximately 11.8 x 2.4 x 9.1 inches (300 x 62 x 230 mm).
Does this amplifier require professional installation?
While experienced DIY enthusiasts can install it, we recommend professional installation due to high power and wiring complexity.
What should I do if the amplifier goes into protection mode?
Check for short circuits, low impedance, or overheating. Ensure the power supply is 12V and fuses are intact. Disconnect and recheck wiring.
User questions about FDP 1.2000 FOCAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual FDP 1.2000 - FOCAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDP 1.2000 by FOCAL.
USER MANUAL FDP 1.2000 FOCAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FOCAL
Model : FDP 1.2000
Category : Receiver