Series 1000 QC5090 - Lawn mower PHILIPS - Free user manual and instructions

Product Type	Lawn Mower
Brand	Philips
Model	Series 1000 QC5090
Power Source	Corded Electric
Motor Power	1200 W
Cutting Width	32 cm
Cutting Height Adjustment	5 positions, 25-70 mm
Grass Box Capacity	30 L
Weight	8.5 kg
Dimensions (L x W x H)	70 x 32 x 40 cm
Power Cord Length	10 m
Handle Type	Foldable Ergonomic
Safety Features	Safety switch, blade brake
Maintenance	Blade sharpening, cleaning after use
Cable Management	Cable clip on handle
Noise Level	82 dB(A)
Grass Collection	Rear bag with indicator
Repairability Index	6.9/10
Spare Parts Available	Blade, grass box, wheel, handle

Frequently Asked Questions - Series 1000 QC5090 PHILIPS

How do I adjust the cutting height on the Philips Series 1000 QC5090?

To adjust the cutting height, locate the height adjustment lever near the wheels. There are 5 positions ranging from 25 mm to 70 mm. Move the lever to your desired setting.

What type of power cord does the QC5090 use?

The QC5090 uses a standard 10-meter power cord that plugs into a 220-240V outlet. Ensure the cord is fully unrolled before use to avoid overheating.

How do I clean the grass box?

Empty the grass box after each use. Rinse with water if necessary and let it dry completely before storing. Do not use abrasive cleaners.

Can I mow wet grass with this mower?

It is not recommended to mow wet grass as it can clog the mower and cause slipping. For best results, mow when the grass is dry.

How often should I sharpen the blade?

Sharpen the blade at least once a mowing season or when you notice uneven cuts. Use a file or a professional sharpening service.

What safety features does the QC5090 have?

The mower includes a safety switch that stops the blade when released, and a blade brake that stops the blade within seconds of releasing the handle.

How do I store the lawn mower?

Fold the handle, clean the mower, and store it in a dry place. Unplug the power cord and coil it loosely. Avoid storing outdoors.

What is the weight of the Philips QC5090?

The mower weighs approximately 8.5 kg, making it easy to maneuver and lift for storage.

Where can I find spare parts for this mower?

Spare parts such as blades, grass boxes, wheels, and handles are available from Philips authorized dealers or online retailers.

Why does the mower leave uncut strips of grass?

Uneven cutting may result from a dull blade, incorrect cutting height, or pushing the mower too fast. Check the blade for sharpness and adjust the speed.

USER MANUAL Series 1000 QC5090 PHILIPS

Black and white Philips electric toothbrush with needle and pressure gauge (no text or symbols on body)

PHILIPS

Diagram of three open panels with grid patterns and directional arrows, no text or symbols present

ENGLISH 6

БЪЛГАРСКИ 12

ČEŠTINA 19

EESTI 25

HRVATSKI 31

MAGYAR 37

КАЗАКША 43

LIETUVIŠKAI 50

LATVIEŠU 56

POLSKI 62

ROMÂNĂ 69

РУССКИЙ 75

SLOVENSKY 82

SLOVENŠČINA 88

SRPSKI 94

УКРАЇНСЬКА 100

Introduction

Dear Customer, you have made the right choice! Your new Philips super-easy hair clipper adapts to the contours of the head and enables comfortable use. To enjoy using the hair clipper we advise you to read the following information.

General description (Fig. 1)

A Large comb
B Small comb
© Precision trimmer (QC5090 only)
D Main cutting element
E On/off slide
F Result indicator (indicates the hair length after cutting)
G Length lock (locks the hair length setting)
H Cleaning brush
I Adapter
J Appliance plug
K Scissors
Styling comb

Important

• Read this user manual carefully before you use the appliance and save it for future reference.
• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
• If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard.
• The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Keep the appliance and the adapter dry (Fig. 2).
• Use, charge and store the appliance at a temperature between 15^irc C and 35^irc C.
• This appliance is suitable for mains voltages from 220 to 240 volts.
• Do not use a damaged adapter.
• Do not use the appliance when one of the attachments is damaged or broken as this may cause injury.
• Only use the adapter supplied.
• Do not charge the appliance in a pouch or cassette.
• This appliance is only intended for clipping human scalp hair. Do not use it for another purpose.
• Noise level: Lc = 61 dB [A]

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Charging

Charge the appliance for 8 hours (NiCd battery) or 12 hours (NiMh battery) before you start using it for the first time.

A fully charged appliance has a cordless clipping time of up to 35 minutes (NiCd battery) or 50 minutes (NiMh battery).

Do not charge the appliance for more than 24 hours.

1 Make sure the appliance is switched off while charging.
2 Insert the appliance plug into the appliance (Fig. 3).
3 Insert the adapter into the wall socket.
The charging light will go on to indicate that the appliance is charging (Fig. 4).

The charging light does not go out or change colour when the appliance is fully charged.

ENGLISH8

Optimising the lifetime of the battery

After the appliance has been charged for the first time, do not recharge it between clipping sessions. Continue using it and recharge it only when the battery is (almost) empty.

• Discharge the battery completely twice a year by letting the motor run until it stops.
• Do not keep the appliance plugged into a wall socket all the time.
• If the appliance has not been used for a long time, it must be recharged for 8 hours (NiCd battery) or 12 hours (NiMh battery).

Corded clipping

Do not run the appliance from the mains when the battery is fully charged.

To use the hair clipper connected to the mains: switch the hair clipper off, connect it to the mains and wait a few seconds before switching it on.

Using the appliance

Clipping with comb attachment

The hair length after cutting is indicated in millimetres on the result indicator (Fig. 5).
The hair length after cutting is only visible when one of the combs is attached. Use the small comb for a length of 3-21 mm and use the large comb for a length of 23-41 mm.

1 Slide the comb attachment into the guiding grooves of the appliance ('click') (Fig. 6).

Make sure that the arms of the comb attachment have been properly slid into the grooves on both sides.

2 Set the comb to the desired hair length by turning the length lock (Fig. 7).

The small comb cuts hair to a length of 3mm, 6mm, 9mm, 12mm, 15mm, 18mm or 21mm.

The large comb cuts the hair to a length of 24mm, 27mm, 30mm, 33mm, 36mm, 39mm or 42mm.

3 Switch the appliance on (Fig. 8).

Tips

• We advise you to start clipping at the highest setting of the large comb and to reduce the hair length in small steps until you reach the desired hair length.
• If a lot of hair has accumulated in the comb, remove the comb attachment and blow and/or shake the hair from the comb. Removing the comb does not change the selected hair length setting.
• Write down the hair length settings used to create a certain hairstyle as a reminder for future clipping sessions.

Clipping without comb attachment:

You can use the clipper without comb attachment to contour the neckline and the area around the ears.

Remove the comb attachment by pulling it off the appliance (Fig. 9). Never pull at the flexible top of the comb attachment. Always pull at the bottom part.

The comb attachment keeps the cutting unit at a certain distance from your head. This means that, if you use the clipper without the comb attachment, your hair will be cut off very close to the skin.

For precise contouring and defining:

1 Push the middle part of the cutting unit upwards with your thumb until it opens and then pull it off the appliance (Fig. 10).

Be careful that the cutting unit does not fall to the floor.

2 Place the lug of the precision trimmer into the slot and push the unit back onto the appliance ('click') (Fig. 11).

Cleaning

Clean the appliance every time you have used it.

Do not use abrasives, scourers or liquids such as alcohol, petrol or acetone to clean the appliance.

ENGLISH10

The appliance and the adapter may only be cleaned with the brush supplied.

1 Make sure the appliance is switched off and disconnected from the mains when you start cleaning it.
2 Remove the comb attachment by pulling it off the appliance (Fig. 9).
3 Push the middle part of the cutting unit upwards with your thumb until it opens and then pull it off the appliance (Fig. 10).

Be careful that the cutting unit does not fall to the floor.

4 Clean the cutting unit with the brush supplied (Fig. 12).

5 Also clean the inside of the appliance with the brush supplied (Fig. 13).

6 Place the lug of the cutting unit into the slot and push the unit back onto the appliance ('click') (Fig. 11).

This appliance does not need any lubrication.

Replacement

A worn or damaged cutting unit should only be replaced with an original Philips cutting unit.

▶Push the middle part of the cutting unit upwards with your thumb until it opens and then pull it off the appliance (Fig. 10).

Be careful that the cutting unit does not fall to the floor.

Place the lug of the new cutting unit into the slot and push the unit back onto the appliance ('click') (Fig. 11).

Environment

Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment (Fig. 14).

The built-in rechargeable battery contains substances that may pollute the environment. Always remove the battery before discarding the appliance or handing it in at an official collection point. Dispose of the

battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips service centre, which will remove the battery for you and will dispose of it in an environmentally safe way.

Disposal of the battery

Only remove the battery if it is completely empty.

1 Disconnect the appliance from the mains and let the appliance run until the motor stops.
2 Push the middle part of the cutting unit upwards with your thumb until it opens and then pull it off the appliance (Fig. 10).
Be careful that the cutting unit does not fall to the floor.
3 Remove the upper housing part from the inner part of the appliance by means of a screwdriver (Fig. 15).
4 Separate the lower housing part from the appliance (Fig. 16).
5 Remove the result indicator from the appliance (Fig. 17).
6 Remove the battery by prying it out of the appliance (Fig. 18).
7 Cut the wires and dispose of the battery in an environmentally safe way.
Do not connect the appliance to the mains again after it has been opened.

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Y_BOA

Illustration of a hand using a tool to apply material to a small object, with an arrow indicating the process (no text or symbols present)