A4510L - Basket ETNA - Free user manual and instructions
Find the device manual for free A4510L ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cooker hood |
| Brand | ETNA |
| Model | A4510L |
| Energy class | A |
| Mounting type | Wall-mounted |
| Dimensions (W x D x H) | 600 x 500 x 150 mm |
| Weight | 10 kg |
| Power supply | 230 V, 50 Hz |
| Motor power | 150 W |
| Maximum airflow | 600 m³/h |
| Maximum noise level | 65 dB |
| Lighting | LED, 2 x 2 W |
| Grease filter type | Washable metal |
| Number of speeds | 3 |
| Control | Push buttons |
| Air outlet diameter | 150 mm |
| Recirculation mode | Possible with optional charcoal filter |
| Maintenance | Clean grease filters every month |
| Warranty | 2 years |
| Repairability | Spare parts available |
| Country of origin | France |
Frequently Asked Questions - A4510L ETNA
How to install the ETNA A4510L hood?
The installation must be carried out by a qualified professional. The hood is fixed to the wall at a height of 65 to 75 cm above the hob. Ensure that the air outlet diameter (150 mm) matches the exhaust duct.
How to clean the grease filters?
The metal grease filters are dishwasher safe or can be washed by hand with warm soapy water. They should be cleaned every month or more often in case of heavy use.
Can I use the hood in recirculation mode?
Yes, you need to add an activated charcoal filter (not supplied). This mode recirculates purified air back into the kitchen without external evacuation.
Why is my hood noisy?
Noise can come from a blocked filter, incorrect installation, or a worn motor. Clean the filters and check the fixings. Normal noise level is 65 dB maximum.
How to change the LED bulb?
The LED lighting is integrated and requires a professional to replace. Contact ETNA after-sales service.
What is the recommended installation height?
For an electric hob, the minimum height is 65 cm; for a gas hob, 75 cm. Measure from the cooking surface to the bottom of the hood.
Is the remote control supplied?
No, the ETNA A4510L hood is controlled by push buttons on the front panel.
What to do if the hood does not turn on?
Check the power supply and fuse. If the problem persists, contact technical support.
How to reset the filter saturation indicator?
Press the 'speed' button for 3 seconds until the indicator flashes then turns off. Refer to the manual for the exact model.
Where to find spare parts?
Spare parts are available from authorized ETNA dealers or on the official website. Use the reference A4510L to order.
User questions about A4510L ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual A4510L - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A4510L by ETNA.
USER MANUAL A4510L ETNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ETNA
Model : A4510L
Category : Basket