T4340T - Basket ETNA - Free user manual and instructions
Find the device manual for free T4340T ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted cooker hood |
| Brand | ETNA |
| Model | T4340T |
| Dimensions (W x D x H) | 60 cm x 50 cm x 40 cm |
| Weight | Approximately 12 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Maximum power | 200 W |
| Maximum airflow | 600 m³/h |
| Maximum noise level | 65 dB(A) |
| Number of speeds | 3 speeds + intensive |
| Lighting | 2 LED bulbs (2 x 3 W) |
| Grease filter | Dishwasher-safe metal filter |
| Charcoal filter (optional) | 2 activated charcoal filters (model ZFCT4340) |
| Exhaust mode | External exhaust or recirculation (with charcoal filter) |
| Outlet diameter | 150 mm |
| Filter maintenance | Clean the metal filter every month; replace the charcoal filter every 3-6 months |
| Exterior cleaning | Wipe with a soft cloth and non-abrasive detergent |
| Safety device | Automatic shut-off in case of overheating |
| Repairability index | 7.5 / 10 |
| Spare parts available | Bulbs, filters, motor, electronic board (from after-sales service) |
| Warranty | 2 years (parts and labor) |
| Standards | CE, NF |
| Accessories included | Mounting kit, user manual, exhaust tube |
Frequently Asked Questions - T4340T ETNA
How to install the ETNA T4340T hood?
Installation must be carried out by a qualified professional. Fix the hood to the wall using the provided mounting kit, respecting a minimum distance of 65 cm above an electric hob and 75 cm for a gas hob. Connect the exhaust duct to the outside or install the charcoal filters for recirculation.
How to clean the grease filter?
The metal filter can be cleaned in the dishwasher at a maximum of 65°C, or by hand with warm soapy water. Let it dry before putting it back. Clean it every month to ensure good efficiency.
When should the charcoal filter be replaced?
The charcoal filter should be replaced every 3 to 6 months depending on use. Use the ZFCT4340 model specific to your hood. A saturated filter reduces suction efficiency.
What to do if the hood does not turn on?
First check the power supply: plug, fuse, circuit breaker. If that does not solve the problem, check that the controls are properly engaged. If the fault persists, contact after-sales service.
How to adjust the suction speed?
Use the control buttons to select one of the 3 speeds. The intensive function (if available) offers a temporary boost. Adjust the speed according to the amount of steam and odors.
The hood is making noise, is that normal?
Some noise is normal, especially at high speed (max 65 dB). If the noise becomes abnormal (squeaking, vibrations), check that the hood is securely fixed and that the filters are clean. Contact after-sales service if necessary.
How to replace the LED bulbs?
Disconnect the power. Gently remove the old bulb by turning it counterclockwise. Replace it with an LED bulb of the same type (G4, 3W max). Close the cover.
Can I use the hood without external exhaust?
Yes, in recirculation mode. You need to install activated charcoal filters (sold separately). The air is filtered and then returned to the kitchen. Remember to replace the charcoal regularly.
How to obtain spare parts?
Contact ETNA after-sales service or an authorized dealer. Common parts such as filters, bulbs and motor are available. Have your model number (T4340T) and serial number ready.
What to do if the control buttons no longer respond?
Clean the control panel with a slightly damp cloth and dry it. Avoid excessive moisture. If the problem persists, it may be an electronic defect: contact after-sales service.
User questions about T4340T ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual T4340T - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T4340T by ETNA.