TO200 - Basket ETNA - Free user manual and instructions
Find the device manual for free TO200 ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ETNA |
| Model | TO200 |
| Product type | Wall-mounted decorative hood |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 30 cm (telescopic up to 100 cm) |
| Net weight | 15 kg |
| Power supply | 220-240 V / 50 Hz |
| Motor power | 200 W |
| Maximum airflow | 400 m³/h |
| Maximum noise level | 55 dB(A) |
| Energy class | A |
| Lighting | LED, 2 x 3 W |
| Filter type | Washable aluminum grease filter |
| Carbon filter included | No (optional) |
| Number of speeds | 3 |
| Controls | Push buttons |
| Evacuation | Outlet Ø 150 mm (recycling possible with charcoal kit) |
| Installation | Wall-mounted, on duct or recycling |
| Cleaning | Filters in dishwasher, surface with soft cloth |
| Repairability index | 7.5/10 (spare parts available) |
| Warranty | 2 years |
Frequently Asked Questions - TO200 ETNA
How to install the ETNA TO200 hood?
Installation must be carried out by a professional. Attach the wall bracket using the supplied plugs, connect the exhaust duct (if exhaust version) and plug in the appliance. Follow the diagrams in the manual for safety distances (minimum 65 cm above an electric hob, 75 cm for gas).
How to clean the grease filters?
The aluminum filters can be cleaned in the dishwasher (short cycle, low temperature) or by hand with warm soapy water. Let them dry completely before reinstalling. Clean them monthly for optimal efficiency.
Can I use the hood without external evacuation?
Yes, the TO200 hood can operate in recirculation mode by adding a charcoal filter (sold separately). In this mode, the air is filtered and then returned to the room. Make sure to install the charcoal filter as indicated in the manual.
How to change the LED bulb?
The hood is equipped with integrated LED lighting. If the bulb no longer works, it is not individually replaceable; the entire lighting module must be replaced. Contact ETNA after-sales service to obtain the spare part.
The hood is noisy, what should I do?
Check that the hood is properly installed and that the filters are clean. Abnormal noise may be due to a blocked duct or a defective motor. If the noise persists, contact an authorized technician.
What is the minimum distance between the hood and the hob?
For an electric hob, the minimum distance is 65 cm; for a gas hob, 75 cm. Respect these distances to ensure safety and proper operation.
How to activate maximum speed?
Press the speed 3 button (usually the largest symbol). The hood will extract at full power. Use this speed for strong odors or abundant steam.
Should the exhaust duct be cleaned?
Yes, it is recommended to have the exhaust duct inspected and cleaned by a professional every 2 to 3 years to prevent grease buildup and reduce fire risks.
Where to find spare parts for the TO200 hood?
Spare parts are available from the ETNA after-sales service or on appliance parts websites. Refer to the model number (TO200) and the parts list in the manual.
What to do if the control buttons do not respond?
Unplug the hood for 5 minutes, then plug it back in to reset the electronics. If the problem persists, check that the control panel is not damp or damaged. Contact customer service if necessary.
User questions about TO200 ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual TO200 - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TO200 by ETNA.
USER MANUAL TO200 ETNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ETNA
Model : TO200
Category : Basket