WO70 - Basket Atag - Free user manual and instructions
Find the device manual for free WO70 Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Kitchen hood |
| Brand | Atag |
| Model | WO70 |
| Overall dimension | 700 mm wide, 500 mm deep, 600-1100 mm adjustable height |
| Net weight | Approximately 12 kg |
| Power supply | 230 V ~ 50 Hz |
| Max extraction power | 650 m³/h |
| Max noise level | 65 dB(A) |
| Number of speeds | 3 speeds + intensive |
| Grease filter type | Dishwasher-safe metal filter |
| Charcoal filter (optional) | Recyclable activated charcoal filter |
| Lighting | 2 LEDs of 3 W each |
| Control type | Push-button controls |
| Energy class | A+ |
| Annual energy consumption | 35 kWh/year |
| Extraction efficiency | Class A |
| Air outlet diameter | 150 mm |
| Automatic stop function | Yes, after 10 minutes on intensive speed |
| Grease filter maintenance | Dishwasher cleaning every 2 months |
| Charcoal filter replacement | Every 4 months (in recirculation mode) |
| Exterior cleaning | Soft cloth and mild detergent, avoid abrasives |
| Repairability index | 7.2/10 (spare parts available for 5 years) |
| Manufacturer warranty | 2 years |
Frequently Asked Questions - WO70 Atag
What are the exact dimensions of the Atag WO70 hood?
The hood measures 700 mm wide, 500 mm deep and its height is adjustable between 600 and 1100 mm. Check the space above your cooker before installation.
How to install the hood in recirculation mode?
For recirculation mode, you need to add a charcoal filter (not supplied) and plug the air outlet. Follow the installation diagram in the manual.
How to clean the metal grease filters?
Remove the filters and wash them in the dishwasher at a maximum of 65°C, or by hand with a sponge and mild detergent. Dry them before putting them back.
How often should the charcoal filter be replaced?
In recirculation mode, the charcoal filter should be replaced approximately every 4 months, or more often if the hood is used heavily.
How to adjust the extraction speed?
Press the desired speed button (1, 2, 3 or intensive). The intensive speed turns off automatically after 10 minutes.
What to do if the hood does not turn on?
First check the power supply (fuse/circuit breaker). If that works, inspect the electronic board or contact a professional.
Is the noise level high?
At maximum speed, the noise reaches up to 65 dB(A), which is normal for a hood of this power. Use lower speeds for quieter operation.
How to replace the LED bulb?
The hood uses integrated LEDs that are not individually replaceable. In case of failure, contact after-sales service.
What exhaust duct diameters are compatible?
The air outlet is designed for a duct of 150 mm diameter. Use an adapter if necessary.
Can I order spare parts?
Yes, spare parts (filters, controls, etc.) are available for 5 years after purchase. Visit the Atag website or contact an authorized dealer.
User questions about WO70 Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual WO70 - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WO70 by Atag.
USER MANUAL WO70 Atag
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atag
Model : WO70
Category : Basket