WS1511QM - Basket Atag - Free user manual and instructions
Find the device manual for free WS1511QM Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Kitchen hood |
| Brand | Atag |
| Model | WS1511QM |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 15 cm (built-in) |
| Weight | Approximately 12 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Maximum power | 300 W (motor + lighting) |
| Lighting | 2 LED bulbs 2W (integrated) |
| Controls | Mechanical push buttons |
| Number of speeds | 3 speeds + intensive |
| Grease filter | Dishwasher-safe metal |
| Charcoal filter | Optional (not included) |
| Extraction type | Recirculation or external duct (DN 120/150) |
| Noise level | 55-65 dB (depending on speed) |
| Maximum airflow | 650 m³/h |
| Maintenance | Clean the grease filter monthly; change the charcoal filter every 3-6 months |
| Safety | Automatic shut-off not specified; use according to instructions |
| Spare parts | Filters, LED bulbs, control buttons |
| Repairability | Repairability index: 6/10 (estimated) |
Frequently Asked Questions - WS1511QM Atag
How to install the Atag WS1511QM hood?
Installation must be carried out by a professional. Maintain a safety distance of at least 65 cm between the hood and the hob. Securely fix to the wall or under a cabinet, and connect the extraction according to the chosen mode (recirculation or external duct).
What is the diameter of the extraction duct?
The diameter of the extraction duct is usually 120 mm or 150 mm. Use suitable rigid or flexible ducts. In recirculation mode, install the charcoal filter (not included).
How to clean the grease filter of the hood?
The metal grease filter can be washed in the dishwasher at low temperature (max 65°C) or by hand with warm soapy water. Let it dry completely before replacing. Clean it monthly for optimal efficiency.
Is a charcoal filter needed for the Atag WS1511QM hood?
The charcoal filter is necessary if you use the hood in recirculation mode. This filter is not supplied with the appliance and must be purchased separately. Replace it every 3 to 6 months depending on usage.
How to change the hood bulb?
First unplug the appliance. The LED bulbs are integrated. To access the lighting, remove the diffuser or the grease filter depending on the model. Use an identical replacement bulb (LED 2W). Contact after-sales service if necessary.
The hood makes noise during operation, is this normal?
Ventilation noise is normal, up to about 65 dB at full speed. If the noise is abnormal, check that the filter is properly in place and that nothing is blocking the duct. If the problem persists, contact customer service.
Why is my Atag hood not extracting properly?
First check that the grease filter is not clogged. Also ensure that the extraction duct is not obstructed. If you are in recirculation mode, the charcoal filter must be changed regularly.
Can I use the hood without an external extraction duct?
Yes, in recirculation mode. You must install an activated charcoal filter (optional). In this case, the air is purified and returned to the room.
How to adjust the speeds of the Atag WS1511QM hood?
Use the push buttons on the front. There are usually 3 speeds (1,2,3) and an intensive mode (boost). Press the corresponding button to increase or decrease the power.
What are the exact dimensions of the hood?
The hood measures approximately 60 cm wide, 50 cm deep, and 15 cm high. For built-in installation, these dimensions may vary slightly. Refer to the diagram in the manual for a precise template.
User questions about WS1511QM Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual WS1511QM - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS1511QM by Atag.