WS9011MX - Basket Atag - Free user manual and instructions
Find the device manual for free WS9011MX Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted extractor hood |
| Brand | Atag |
| Model | WS9011MX |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 60 cm (excluding duct) |
| Net weight | 18 kg |
| Power supply | 220-240 V / 50 Hz |
| Maximum extraction power | 650 m³/h |
| Maximum noise level | 68 dB(A) |
| Number of speeds | 3 + intensive |
| Lighting | LED, 2 x 3 W |
| Filter type | Washable metal grease filter |
| Active carbon filter | Optional (recirculation) |
| Air outlet diameter | 150 mm |
| Controls | Touch electronic |
| Delayed shut-off function | Yes (10 minutes) |
| Filter saturation indicator | Yes |
| Maintenance | Monthly cleaning of grease filters in dishwasher |
| Energy class | A |
| Available spare parts | Filters, bulbs, remote control |
| Repairability | Repairability index: 7.2/10 |
Frequently Asked Questions - WS9011MX Atag
What are the possible evacuation modes for this hood?
The Atag WS9011MX hood can operate in external evacuation mode (air expelled outside via a duct) or in recirculation mode (air is filtered and returned to the kitchen). For recirculation, an optional active carbon filter is required.
How to clean the grease filters?
The metal grease filters are cleaned in a dishwasher at low temperature (short program, max 50°C) or by hand with hot water and dish soap. It is recommended to clean them every month or as soon as the saturation indicator lights up.
What to do if the hood does not turn on?
First check that the appliance is properly plugged in and that the fuse or circuit breaker has not tripped. Make sure the control unit is clean and dry. If the problem persists, contact Atag customer service.
How to install the active carbon filter?
The active carbon filter is placed behind the grease filters. Open the grids, remove the metal filters, then insert the carbon filter by clipping or screwing it depending on the model. Then replace the grease filters.
How often should I replace the carbon filter?
The active carbon filter should be replaced every 3 to 6 months, depending on usage of the hood. A saturation indicator can alert you.
Is the hood compatible with a remote control?
Yes, the WS9011MX can be controlled via an infrared remote control supplied as an option. You can control the lighting, speeds, and delayed shut-off remotely.
What is the procedure to unlock the keys in case of lock?
If the touch panel is locked, press the + and - keys simultaneously for 3 seconds to unlock. The lock symbol will disappear.
Can I install this hood above a gas hob?
Yes, but maintain a minimum distance of 65 cm between the cooking surface and the bottom of the hood. For an electric hob, the minimum distance is 50 cm.
How to activate the delayed shut-off function?
After using the hood, press the delayed shut-off button (often represented by an hourglass). The hood will continue to operate for 10 minutes, then turn off automatically.
Where can I find spare parts for my hood?
Spare parts (filters, LED bulbs, remote control) are available from Atag customer service or from authorized dealers. Use the model number WS9011MX to order.
User questions about WS9011MX Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual WS9011MX - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS9011MX by Atag.
USER MANUAL WS9011MX Atag
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atag
Model : WS9011MX
Category : Basket