WS9011DM - Basket Atag - Free user manual and instructions
Find the device manual for free WS9011DM Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Decorative chimney hood |
| Brand | Atag |
| Model | WS9011DM |
| Dimensions (W x D x H) | 900 x 500 x 400 mm |
| Weight | 15 kg |
| Power supply | 220-240 V / 50 Hz |
| Maximum extraction rate | 680 m³/h |
| Maximum noise level | 65 dB(A) |
| Control type | Touch electronic + remote control |
| Lighting | LED, 2 x 3 W |
| Filters | Washable metal grease filter; optional activated carbon filter |
| Energy class | A+ |
| Air outlet diameter | 150 mm |
| Speeds | 3 speeds + boost function |
| Timer | Yes (delayed shut-off) |
| Maintenance | Clean grease filters monthly; replace carbon filter every 3-6 months |
| Safety | Automatic shutdown after 24 hours of continuous operation |
| Spare parts | Filters, motor, LED bulbs, remote control available |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - WS9011DM Atag
How to install the Atag WS9011DM hood?
Installation must be carried out by a qualified professional. Maintain a minimum distance of 65 cm above an electric hob and 75 cm for a gas hob. Securely fix the hood to the wall and connect it to an external exhaust duct or use it in recirculation mode with a carbon filter.
How to clean the grease filters?
The metal grease filters can be cleaned in the dishwasher (low temperature program) or by hand with warm soapy water. Allow to dry completely before putting them back. Monthly cleaning is recommended.
Can I use the hood in recirculation mode without external exhaust?
Yes, the hood can operate in recirculation mode. You must then install an activated carbon filter (optional) that absorbs odors. The carbon filter should be replaced every 3 to 6 months depending on use.
What to do if the hood does not turn on?
First check the power supply (fuse/circuit breaker). Make sure the controls are unlocked (some models have child lock). If the problem persists, contact an authorized Atag technician.
How to set the timer?
Press the timer button (usually represented by a clock) to activate delayed shut-off. You can choose a duration of 5 to 15 minutes. The hood will automatically turn off at the end of the set time.
Are the LED bulbs replaceable?
Yes, the LED bulbs are replaceable. Make sure to use bulbs of the same type (G4, 3W max). Disconnect the hood before replacing a bulb and allow it to cool down.
Why is my hood making noise?
Abnormal noise can come from clogged filters, a blocked exhaust duct, or an unbalanced motor. Clean the filters and check the duct. If the noise persists, have the motor checked.
How to use the boost function?
The boost function activates maximum power for a short duration (usually 5 to 10 minutes) to quickly remove strong smoke or odors. Press the Boost button (often marked with an upward arrow).
Where to find spare parts for the Atag WS9011DM hood?
Spare parts (filters, bulbs, motor, remote control) are available from authorized Atag dealers or on their website. Use the exact model reference to order.
The hood stops by itself, is that normal?
Yes, the hood is equipped with an automatic shut-off safety after 24 hours of continuous operation to prevent overheating. If it stops earlier, check that you have not activated the timer or a programmed mode.
User questions about WS9011DM Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual WS9011DM - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS9011DM by Atag.