SGS4682 - Dishwasher BOSCH - Free user manual and instructions
Find the device manual for free SGS4682 BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | Bosch |
| Model | SGS4682 |
| Dimensions (W x D x H) | 60 x 60 x 82 cm |
| Net weight | 40 kg |
| Energy class | A |
| Number of place settings | 12 |
| Noise level | 48 dB |
| Wash programs | Eco 50°C, Automatic 45-65°C, Intensive 70°C, Quick 45°C, Pre-wash |
| Water consumption per cycle | 12 L |
| Power consumption per cycle | 1.05 kWh |
| Power supply | 230 V, 50 Hz, 10 A |
| Installation type | Built-in |
| Drying type | Heat exchanger |
| Special functions | Delayed start, Leak protection, AquaStop |
| Maintenance and cleaning | Regular cleaning of filters and spray arms |
| Spare parts and repairability | Available through Bosch after-sales service, repairability index 7.5/10 |
| General information | User manual available in French in PDF format |
Frequently Asked Questions - SGS4682 BOSCH
How to start a wash program on the Bosch SGS4682?
Select the desired program using the rotary selector, then press the Start button. Close the door to start the cycle.
What to do if the dishwasher does not drain?
First check the filter and drain hose for any blockage. If the problem persists, refer to the manual for error codes.
Which detergents to use?
Use regenerating salt, rinse aid, and dishwasher powder or tablets. Follow the recommended dosages.
How to clean the filters of the Bosch SGS4682?
Remove the lower basket, unscrew the filter by turning counterclockwise, rinse it under running water, then reassemble.
The dishwasher displays an error code, what to do?
Note the code, turn off the appliance, wait a few minutes then turn it back on. If the code persists, refer to the error table in the manual.
How to adjust the water softener?
Refer to the water hardness table in the manual, then use the hardness selector located inside the door to adjust.
Why is the dishes not dry after the cycle?
Make sure the rinse aid is sufficient and the drying program is enabled. Open the door at the end of the cycle to speed up drying.
Can I use 3-in-1 tablets?
Yes, select the appropriate program and enable the Multitab option if available. Set the water hardness to zero and do not add extra salt or rinse aid.
How to replace the anti-scale filter?
The anti-scale filter is usually located at the bottom of the tub. Unscrew it, clean it, or replace it with an original Bosch part.
Where to find the complete user manual?
You can download the PDF manual for free from the website notice-facile.com by searching for model SGS4682.
User questions about SGS4682 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SGS4682 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SGS4682 by BOSCH.